Djinn SP Sub 250 6s DJI O4 Lite

This is my first quad build in years, and on my first attempt, I was in betaflight with my 6s lipo plugged in and my esc burst into flames after about 30sec... all of my soldering was clean and I used a smoke tester first power up.... 

Got a new stack and finally put it back together.

For this build, I had to buy an O4 air extension cable because the stock air unit cable on the Lite is really short, being that it's intended for little whoops.

I also had to splice the FC cable to work with the air units' small black connector.

Originally the Capacitor came on the board, but it just wouldn't fit, so I used a WaFL’s XT30 Cap Cap.

For this build, I went with the 3000kv motors and 6s, and I wanted to try 6s on a small quad.

Had my first flight this morning and it flys great. Definitely need some tunning and rate adjustments, but its a great little flyer!