AM Arrowmax Black Golden 1/10 & 1/12 Pan Car Set-Up System w/Bag
About this part
Features:
- Precise adjustment of: Camber, Caster, Front and rear toe, Steering throw.
- High quality engraving for precise readings
- Includes all necessary hardware
Reviews4.4 · 7 reviews
Built really nice. Just as good as my Hudy I have for touring. The only issue I had was one of the screw holes was not threaded all the way. I had to force a steel screw in to finish the threads. Don't use the provided aluminum thumb screws to do this or you will likely mess them up. Other than that a great product.
This is a 100% must have tool if you are racing 1/l2th or 1/10th pan cars. I can't believe I waited so long to buy a setup station. This will make improvements on lap times no doubt. The only downside is the price...
Setup station works great! The only tricky part, is figuring out what bearings you will need for your particular car. Your standard wheel bearings will probably not work. I had to order special bearings for both my F1 and 12th scale cars.
Really like the design and looks of this station. Quality is top notch! Works great on my A12 pan car, don't forget you need 4 wheel bearings if you don't want to take the bearings from your wheels out. Def recommend this setup station! Having camber, caster and toe settings right can be the difference maker when racing.
Not missing anything. Pop out the shouldar bearing from the rims (fronts) Place them in the threaded cup (both sides) Screw in fully to the camber plate. Then slide it onto the axle fror a perfect fit. Snug the nut on the end and your golden. Dead nuts center. Love this thing! Dont know if I can post a photo?
Reviewers rate this AM Arrowmax Black Golden 1/10 and 1/12 pan car set-up system highly, generally describing it as well built, good-looking and comparable to premium alternatives. Several say it is a useful tool for improving setup and lap times. Recurring points include the need to buy separate bearings, as standard wheel bearings may not fit, and the need to source four bearings if wheel bearings are not to be removed. One reviewer reported a screw hole that was not fully threaded and had to be finished with a steel screw. Another found attaching the plates unclear at first and needed outside help. Some reviewers consider the price high.
- + Well built, high-quality craftsmanship
- + Attractive design and finish
- + Useful for camber, caster and toe setup
- + Includes a carry bag
- − Requires separate bearings, standard wheel bearings may not fit
- − Price considered high
- − One screw hole not fully threaded out of the box
- − Plate attachment instructions unclear for some buyers