APC 6x4 Sport Propeller
About this part
This is the APC Propeller. APC propellers are manufactured using a pultrusion process which allows for a higher fiber (60%) to resin (nylon binder) density. This provides substantially higher strength and stiffness than glass-filled nylon. The additional stiffness is beneficial to control vibration resonance response. The higher strength allows the use of thinner cross-sections, beneficial to weight and aerodynamic efficiency.
Features:
- Computer-optimized design gives these props a thinner profile and more "bite" with less noise
- Lightweight molded nylon construction reduces rotating mass for higher output and longer life
- Reinforcing fibers help maintain true, constant pitch at any RPM
Specifications:
- Propeller Diameter: 6in (152.4mm)
- Pitch: 4in (101.6mm)
- Hub Diameter: 0.5in (12.7mm)
- Hub Thickness: 0.25in (6.35mm)
- Shaft Diameter: 0.25in (6.35mm)
- Weight: 0.18oz (5.1g)
- Rotation: CCW (Standard/Tractor)
Reviews5.0 · 1 review
Excellent prop even for use on High Kv electric outrunner motors. I have tested and run this prop on 2212/6 2200 Kv motors and it produces more thrust at a lower amp draw than the 6x4 APC electric props I was using on a 3S battery. Also on a 2212/5 2700 Kv motor, the thrust increase over the 6x4 APC electric was 5 oz and the amps actually dropped from 35 to 32 :) Great product and I will purchase more in the future. Also a shout out to AMain, great service, prices and very good shipping rates to Canada, very pleased with the product and the service. Thanks AMain :) Cheers, Scott