Parts/Complete vehicles & kits/Ready-to-run (RTR)/Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio, Battery & Charger
Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio, Battery & Charger
Axial

Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio, Battery & Charger

Part # AXI-3289T14.9(8)
Where to buy
$99.99
AMain Hobbies
Seen Oct 12, 2026
$99.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

Axial SCX30 Toyota Tacoma TRD Pro Banner Image

Small Scale Trail-Ready Rig Sized for Anywhere

The Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler brings the officially licensed Toyota Tacoma TRD Pro to Axial's SCX30 sub-micro crawler platform. Built around a high-performance chassis with full-time four-wheel drive, this compact crawler is designed to handle everything from desktop obstacles and tight indoor terrain to outdoor rock and dirt trails. The officially licensed ABS hard body combines scale detail with chassis-mounted front and rear LEDs, while the T1 configuration adds a wider stance, larger tires, and a fender delete for a dedicated rock crawler appearance.


About the SCX30 Toyota Tacoma TRD Pro


High-Performance Crawler Chassis

The SCX30 chassis incorporates features typically associated with competition-focused crawlers, including an angled skid plate that helps the truck slide over challenging obstacles rather than hang up on them. Ramped axle housings and high-clearance rear links further help prevent dragging, while the forward weight bias improves climbing stability on technical surfaces. The longer wheelbase provides additional composure around larger obstacles, and the factory-installed electronics are mounted low in the chassis to help optimize the center of gravity.

Officially Licensed Tacoma Body

The injection-molded ABS hard body is officially licensed by Toyota and provides detailed scale styling for the 1/30-scale Tacoma TRD Pro. Chassis-mounted front and rear LEDs add functional lighting to the body, while molded accessories provide additional scale detail. The clipless body mounting system allows the body to be removed without conventional body clips, providing fast access to the chassis for battery replacement and general maintenance.

Wheels & Tires

The T1 configuration uses officially licensed BFGoodrich Krawler tires mounted on officially licensed KMC Torx wheels, giving the crawler a wheel and tire combination specifically suited to its crawler-focused design. The soft compound tires feature factory-installed foam inserts and are designed to provide the traction needed for crawling across desktop obstacles as well as rock and dirt trails outdoors. The T1 also uses larger tires, a wider stance, and a fender delete, creating the stripped-down appearance associated with a dedicated trail rig.

Features:

  • High-performance chassis built for technical crawling
  • Angled skid plate helps slide over obstacles
  • Ramped axle housings help reduce dragging and hangups
  • Forward weight bias improves climbing stability
  • Longer wheelbase adds composure around larger obstacles
  • T1 configuration with a wider stance and larger tires
  • BFGoodrich Krawler tires use a soft compound for added traction
  • KMC Torx wheels give the T1 its dedicated rock crawler look
  • Clipless body mount provides quick access to the chassis
  • Front and rear LEDs add functional lighting to the officially licensed Tacoma body

Includes:

  • (1) SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler
  • (4) BFGoodrich Krawler Pre-Mounted Tires w/KMC Torx Wheels
  • (1) Spektrum SLT2 2.4GHz Radio
  • (1) Spektrum SLT Brushed 2-in-1 ESC/Reciever
  • (1) 88T 030-Size Brushed Motor
  • (1) Spektrum 2S 30C LiPo Battery (7.4V/160mAh) w/PH2.0 Connector
  • (1) USB Battery Charger
  • (4) AA Batteries for Transmitter
  • Product Manual

Needed To Complete:

  • Nothing! Everything you need to get out and drive is in the box.

Specifications:

Scale 1:30
Drive 4WD
Power Source 2S LiPo
Length 6.9in (175.3mm)
Wheelbase -
Width 2.85in (72.5mm)
Height 2.69in (68mm)
Weight 5.3oz (150.3g)
Electronics
Motor: Brushed
ESC Brushed
Connector PH2.0
Servo SX112 Micro Analog
Wheels
Front -
Rear -
Hex -
Tires
Front BFGoodrich Krawler
Rear BFGoodrich Krawler
Assembly Level RTR*

*Tech Note: Ready-to-Run models come equipped with all electronics and include the transmitter needed for use. Please check the "Needed To Complete" above to make sure you have everything you need to get out and enjoy your RC model.

Manuals:

User Manual

CA Residents Prop 65 Warning WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...

Reviews4.9 · 8 reviews

BrennanVerified owneron Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green)

I pre-ordered the day it was released and the wait was absolutely worth it! Out of the box performance was fantastic, better than the scx24's in my opinion. The body detail is next level, the box stock electronics were surprisingly good and lasted longer than the box stock electronics of the scx24's I've owned. My kids and I ran 3 packs through the stock system the day it arrived and had zero issue or complaint. I upgraded to the Injora green viper system, Meus digital servo and aluminum battery/esc trays and I don't think it needs anything else to be a microbeast. And I can't express just how much I appreciate Axial including $1.25 worth of AA batteries in every single RTR they offer! Its a very small gesture that goes a long way and it definitely helps make it easier to buy Axial products knowing that they care about the end user.

2 found this helpful
Tanner ClarkVerified owneron Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green)

Absolutely love this rig and is the best out of all the SCX30 line up. I have purchased every single one so far. The only reason the Taco loses a star is due to the NEW taillight configuration. The light doesn't evenly disperse to the left taillight and leaves the rig with a very dim light on one side. Very disappointed and wish they kept to the old way of taillights instead of the new rear light configuration.

1 found this helpful
Greg WronaVerified owneron Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green)

I bought one of each flavor and each does surprisingly well, even on 1-3” landscape stone and small pieces of flat stone. For the price, tough to beat.

1 found this helpful
Genesis Lee ChuaVerified owneron Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green)

This is my 1st scx30 and I’m having so much fun with it out of the box. Right now I did a couple of upgrades and it’s twice the fun!!! The details of this tacoma is spot on! This little truck has the same level Of fun with my bigger scales.. I don’t usually do reviews but gotta do with this one!

1 found this helpful
Randy AndersonVerified owneron Axial SCX30 Toyota Tacoma TRD Pro 1/30 4WD RTR Scale Mini Crawler (Green)

Absolutely love these scx30s! Indoors or outdoors. They're great straight out of the box

1 found this helpful
What reviewers say

Reviewers of the green Axial SCX30 Toyota Tacoma TRD Pro RTR are broadly positive, with most rating it 5/5 and describing strong out-of-box performance, good detail, and capable crawling on stones, sidehills and verticals. Several note the stock electronics performed well, and some mention upgrades such as a different radio system, servo, and aluminum trays, or a desire for brushless power and brass weights. One 4/5 review reports a dim light on the left taillight due to the new rear light configuration, which the reviewer found disappointing. One reviewer notes the bed sometimes snags on obstacles. Several reviews are brief and general in tone.

  • + Strong out-of-box performance
  • + Good body detail
  • + Capable on stones, sidehills and verticals
  • + Stock electronics perform well
  • − Dim left taillight from new configuration
  • − Bed hangs up on obstacles
  • − Upgrades often desired (brushless, brass weights)
Summary generated from the reviews above.

Builds using this part

No builds use this part yet — add it to yours from the build editor.