Bittydesign VPR 1/7 Supercar Body (Clear) (Arrma Felony)
About this part
Bittydesign VPR - 1/7 Scale Arrma Felony Supercar Clear Body
The Bittydesign VPR 1/7 Supercar Body was designed to be an extraordinary product developed for the Arrma Felony. Made using iconic muscle car styling, this body gives you sleek lines with a precision finish. From the long, aggressive front end to the smooth rear transitions, this body will give racers a great balance of performance and aesthetics.
NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
- Made with high quality and genuine polycarbonate Lexan, 1.5mm thick
- Also compatible with the Traxxas XO-1 chassis and Hobao Extreme VTE2
- Sold clear with protective film outside
- Includes a pre-cut decal and windows mask sheet
Length: 28.74in (730mm)
Width: 13.22in (336mm)
Height: 7.08in (180mm)
Wheelbase: 15.98in (406mm) (with Arrma dBoots Hoon wheels)
TECH NOTE: For installation on the Arrma Limitless chassis, you must also purchase the following parts: ARRMA Infraction Body Post Mount Set (ARA320517), ARRMA Front Bumper Support (ARA320521), ARRMA Front Bumper (ARA320515) ARRMA Outcast Body Post Set (ARA320357).
Includes:
- (1) Bittydesign VPR 1/7 Supercar Body
- (1) Rear Wing
- (1) Decal Sheet
- (1) Window Mask Sheet
- Wing Mount Hardware
Reviews5.0 · 4 reviews
Definitely a super cool body for the XO1 and can fit well but with some needed modifications. It is quite wide and will overhang the wheels so I added +12mm hub extensions from Integy. Also, the body mounts will be too short so I used the Pro line body posts extensions. Both the hub and body extensions I believe were intended for the T-maxx but work on the XO1.
I haven’t mounted it and ran it yet, but I’m sure it’ll be fine with how thick the lexan is. And it looks absolutely stunning once it’s painted. Only thing I’d say is for the wing, you’ll probably want to peel off the plastic protective wrap and paint it on the bottom so you keep the shine of the lexan facing up
This body is very well made, nice and thick and able to take a beating. I put one on my Arrma Felony and it looks so bada$$. It's atleast 2mm thick because it doesn't bend or ding when it hits something. Very solid body, more than I was expecting,easy to use for drifting or speed runs. I recommend taping the sides down if you speed run with this tho. I had the sides ballooning up and causing the rc to flip at 75+. Some duct tape and it's good to go but just take note!
nice realistic look! i did a blue with white stripe "stunning"
Reviewers rate this clear 1/7 supercar body highly, praising its looks once painted and its thick, durable lexan that resists dings. Several note it fits the Arrma Felony/XO1 but is wide and needs modifications: one owner added 12mm hub extensions and longer body post extensions, which they believe were designed for a T-Maxx. One reviewer advises taping the sides down for high-speed runs, reporting the sides ballooned and caused a flip at around 75+. One reviewer had not yet run the body. Advice on the wing is to remove the protective wrap and paint the underside to keep the lexan shine facing up.
- + Thick, durable lexan
- + Realistic, attractive look
- + Looks good once painted
- + Fits Arrma Felony/XO1
- − Wide; overhangs wheels
- − Body mounts too short
- − Sides may balloon at speed
- − Wing needs painting prep