Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)
About this part
The Bittydesign ZL21 Pro Drag Racing Body was developed to provide racers with an extraordinary looking body, that has the aerodynamics and quality needed to give an edge over the competition. Taking cues from modern muscle car design, the ZL21 offers an incredibly aggressive appearance, manufactured with Bittydesign's obsessive quality standards. But the ZL21 offers more than just a breathtaking look! The advanced aerodynamics help to put all the power to the ground, providing incredible stability under acceleration in a platform that makes it a great choice for both prep track street eliminator class, as well as parking lot no prep racing.
Accessories that make the difference!
Every detail was considered during the design phase. The ZL21 includes a variety of accessory parts that add detail, and aid in performance. A rear wing extension is included to improve performance, helping to generate clean air and reduce turbulence in the rear of the car. A front splitter is included to create a more aggressive appearance, as well as help increase front end stability. Plus, a set of zoomie style pipes and turbo style exhaust are included to add more detail and can be installed if you choose. But that's not all - if the ultimate performance is desired, the optional Pro-drag wing is available (BDYDG-ZL21W - not included) to create an even more aggressive look and increase rear end stability.
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
- Advanced aerodynamic design for no prep/street eliminator racing
- Molded from genuine 1mm thick Lexan® polycarbonate
- Includes rear wing, front splitter and two exhaust options
- Optional Pro-drag wing is available separately (BDYDG-ZL21W - not included)
- Accessory installation hardware included
- Sold clear with overspray film applied
- Includes pre-cut decal sheet and the window mask
Length: 640mm
Width: 280mm
Height: 164mm
Wheelbase: 330mm
NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.
Exhaust Installation:
- Choose which exhaust to install, and paint.
- Remove material along cut lines with quality scissors or dremel - remove the longer section to install the zoomie style pipes, and the shorter section to install the single turbo pipe.
- Apply double sided tape over the exhaust plate and press it inside the body to secure the exhaust to the body.
Reviews4.3 · 9 reviews
The body itself is very nice. Excellent details, and looks really proportionate on the DR10 chassis. The window masks are also very good. The decals themselves are not good at all. They are quite a bit smaller that the imprinted area they are supposed to fit in. I.E. the headlights, grill area, and windshield banner. They also have zero stretch, they will simply tear apart. I’d advise using a slightly soapy solution to apply them because once they are stuck, there is no repositioning.
Very good quality body. Does not distort at 80+mph
This body looks and fits great, but the front is flimsy and has no support, so it wants to flap all over the place at speeds over about 50mph. It’s pretty, but I could NOT get it to work very well for drag racing.
Love this body, very cool looking and everything fits together perfectly can’t wait to see how it performs
Looks great. Feels strong. With a few supports around the body this thing is going to be a ripper on my OG Arrow for 2.7 Index class racing here locally! Super stoked on this body and its a sharp car-show winner for sure.
Reviewers generally praise the body's looks, detail, proportions and fit on the DR10 chassis, and several rate it highly. Window masks are described as good, though one owner received a barely scored sheet and a free replacement. Decals draw the main criticism: owners say they are smaller than the printed areas they should cover, lack stretch and can tear, so careful application is advised. The most recurring problem is front-end flex: two reviewers report the nose flapping or folding at speed (around 50 mph and above), and both say reinforcement or supports are needed for drag use. One owner reports the body holds up at 80+ mph without distortion. Most reviews are from verified owners and refer to this clear variant.
- + Detailed, good-looking body
- + Good proportions on DR10 chassis
- + Good window masks
- + Strong, does not distort at speed
- − Decals smaller than printed areas and tear easily
- − Front end flimsy and flaps at speed
- − Requires reinforcement for drag racing
- − Visible mold lines before painting