Parts/Wheels & tires/Tires (on-road)/DS Racing Drift Element 5 Spoke Drift Wheels (Bronze & Chrome) (2) (Adjustable Offset) w/12mm Hex
DS Racing
DS Racing Drift Element 5 Spoke Drift Wheels (Bronze & Chrome) (2) (Adjustable Offset) w/12mm Hex
Part # DSC-DE-0214.0(1)
Where to buy
$15.99
Prices are as last seen at the store; stock is not tracked.
About this part
The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
Scale: 1/10 Drift
Diameter: 2.04" (52mm)
Width: 1.02" (26mm)
Offset: 4-6-8-10-12mm (Changeable)
Includes:
Assembly NOTE:
- The inner and outer rivet rings need to be glued together prior to final assembly.
- To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
- Custom 5 spoke look
- Adjustable offset allows you to alter the fit and finish to your liking
- Multiple color options and styles are available to best match your build
Scale: 1/10 Drift
Diameter: 2.04" (52mm)
Width: 1.02" (26mm)
Offset: 4-6-8-10-12mm (Changeable)
Includes:
- (2) DS Racing Drift Element Wheels
- (12) 1.5x8mm Socket Head Screws
Reviews4.0 · 1 review
Israel GuajardoVerified owneron DS Racing Drift Element 5 Spoke Drift Wheels (Bronze & Chrome) (2)
Bought these wheels to go with these tires from HPI: HPI4425. Both say are 26mm width, but the wheels are almost 2mm wider, pushing the tire to be flushed with the front edge of the wheel leaves the wheel exposed on the inside. Aesthetically, does not matter, but I am pretty sure I am doing something wrong, when I put together the two piece wheel, I made sure was pushed all the way in, so no gap is extending the width. I like the tire to sit flush on the wheel, but seems that this design is to have a bit of the edges exposed on both sides? I am no drift expert. If you know please let me know, I like to learn at least one thing every day. Keep the hobby fun y'all!
Builds using this part
No builds use this part yet — add it to yours from the build editor.