Parts/Complete vehicles & kits/ARF / BNF aircraft/E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm) w/AS3X & SAFE Select
E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm) w/AS3X & SAFE Select
E-flite

E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm) w/AS3X & SAFE Select

Part # EFL135503.8(5)
Where to buy
$219.99
AMain Hobbies
Seen Oct 12, 2026
$219.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

Micro DRACO Brushless Electric STOL Bush Plane

Experience the thrill of flying with the Micro DRACO Bind-N-Fly Basic Electric Airplane from E-flite. This scaled-down version of the iconic DRACO 2.0m bush plane offers affordability, convenience, and exceptional performance. Perfect for pilots of all levels, the Micro DRACO is micro-sized yet uniquely capable, allowing you to explore more places and enjoy flying in smaller spaces. With its functional scale features including flaps and LED lights, you'll enjoy a realistic flight experience every time you take to the skies. Equipped with factory-installed components such as a brushless outrunner motor, servos, receiver, and ESC, assembly is quick and easy, getting you airborne in no time. Plus, the Spektrum receiver and ESC provide real-time telemetry data, giving you valuable insights into your flight conditions.

Whether you're a beginner or an experienced pilot, the Micro DRACO offers unmatched stability and locked-in feel thanks to exclusive AS3X technology and optional-use SAFE Select flight envelope protection. With its convenient top hatch and easy-to-install/remove one-piece wing, storage and transport are a breeze. No FAA registration or remote ID is required, making it hassle-free to enjoy the thrill of flying. Get ready to take flight and experience the excitement of piloting the Micro DRACO Bind-N-Fly Basic Electric Airplane.

Features:

  • The most affordable, convenient, practical, and easiest to fly DRACO model yet
  • Micro-sized and uniquely capable so it can be flown in more places and smaller spaces
  • Functional scale features including flaps and LED navigation, landing, down, and other lights
  • Factory-installed 3S and 4S 300mAh battery-compatible brushless outrunner motor with 4-blade prop
  • Spektrum receiver and ESC provide real-time battery voltage, current draw, motor RPM, and other data via compatible transmitters

Specifications:

  • Wingspan: 31.1" (790mm)
  • Length: 19.4" (493mm)
  • Weight (without battery): 6.9oz (196g)
  • Motor Type: Brushless
  • Assembly Level: BNF (Bind-N-Fly)

Includes:

  • (1) E-flite Micro DRACO 800mm with:
    • (5) Spektrum Linear Servos (installed)
    • (1) Spektrum Brushless Outrunner Motor (installed)
    • (1) Spektrum Control Unit with Receiver and Brushless ESC (installed)
    • (1) Product Manual

Needed to Complete:

  • Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
  • 3S 11.1V or 4S 14.8V 300mAh LiPo with JST-RCY Connector
  • Compatible LiPo charger
CA Residents Prop 65 Warning WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...

Reviews3.8 · 5 reviews

Rodger HangartnerVerified owneron E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm)

It's hard to write a bad review of such a pretty plane, but the one I received deserves it, unfortunately. Binding and set-up went fine, and I took it out for it's maiden flight. Take off was straight forward and I flew it up to about 3 mistakes high... Did a loop, a couple rolls and then from level flight, the rudder drove hard left and the plane spiraled into the ground. I could SEE the rudder deflected, but no response to the stick. It was a total loss. I didn't even bother to strip the electronics from this one. Bummer.

1 found this helpful
S WVerified owneron E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm)

Update:issue has been resolved. Receiever/ESC was replaced. I'm no expert on the reason for why, But she now flies the way it should out of the box. No fault to Amain. But I greatly appreciate the help they gave to me in correcting the issue as best as they could. Now that I can fly it, amazing bird. Alot of fun. 4 stars because I couldn't fly out the box and required maintenance. 5 stars to Amain Hobbies for offering help when I didn't bother to ask.

Scott CVerified owneron E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm)

Fun, scale detailed plane. It doesn’t do any one thing spectacularly special but is stable and a good flyer. Great size between a UMX and a meter plane.

David PattersonVerified owneron E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm)

Micro Draco 800 mm is an excellent RC. Amain Hobbies is an awesome company to order from, great communication, very fast shipping and excellent prices. My go to hobby online hobby shop.

Anthony BriggsVerified owneron E-flite Micro DRACO Bind-N-Fly Basic Electric Airplane (800mm)

Great little plane fun to fly gets off the ground fast!

What reviewers say

Reviewers of the 800mm E-flite Micro DRACO Bind-N-Fly Basic describe it as a fun, scale-detailed flyer that is stable and launches quickly. One reviewer reported a total loss on the first flight after the rudder drove hard left and did not respond to stick input; the same reviewer later reported the receiver and ESC were replaced by the seller and the aircraft then flew normally. Reviewers also praised the seller, Amain Hobbies, for communication, shipping and prices. Only five reviews are available, and the reviews focus on a single variant.

  • + Stable and good flyer
  • + Fun, scale-detailed appearance
  • + Gets off the ground quickly
  • + Seller praised for communication and fast shipping
  • − One unit failed on first flight with rudder/stick response loss
  • − Required receiver and ESC replacement for one buyer
Summary generated from the reviews above.

Builds using this part

No builds use this part yet — add it to yours from the build editor.