Parts/Electric power/Brushless motors/E-flite Park 300 Brushless Outrunner Motor, 1380Kv: 2mm Bullet
E-flite
E-flite Park 300 Brushless Outrunner Motor, 1380Kv: 2mm Bullet
Part # EFLM1150
Where to buy
$49.99
Prices are as last seen at the store; stock is not tracked.
About this part
Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g).
Features
- Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
- External rotor design with 3.2mm shaft
- Integrated prop saver design
- Low noise level
- Mount, prop adapter and hardware included
- Ideal for models requiring up to 85 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
Specifications
| Outer Diameter | 1.1 in (28mm) |
| Bushing Or Bearing | Bearing |
| Voltage | 7.2–11.1V |
| Resistance | .33 ohms |
| Shaft Diameter | 3.17mm (1/8 in) |
| Idle Current (Io) | .40A @ 8V |
| Connector Type | 2mm Bullet |
| Recommended Prop Range | 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer |
| RPM/Volt (Kv) | 1380 |
| Motor Design | Outrunner |
| Motor Type | Brushless |
Reviews
No reviews yet.
Builds using this part
No builds use this part yet — add it to yours from the build editor.