Parts/Batteries & charging/LiPo batteries/Fantom Pro Series MSV 5.0 2S Graphene LiHV ULCG 160C Battery (7.6V/6200mAh) w/5mm Bullets
Fantom Pro Series MSV 5.0 2S Graphene LiHV ULCG 160C Battery (7.6V/6200mAh) w/5mm Bullets
Fantom

Fantom Pro Series MSV 5.0 2S Graphene LiHV ULCG 160C Battery (7.6V/6200mAh) w/5mm Bullets

Part # FAN26ST6200-ULCG
Where to buy
$94.99
AMain Hobbies
Seen Oct 12, 2026
$94.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

Battery Overview:

The Fantom Pro Series MSV 5.0 2S Graphene LiHV ULCG 160C Battery delivers next-generation performance with lower internal resistance, higher sustained voltage, and a flatter discharge curve that keeps power consistent from tone to finish. With a 6200mAh capacity, 160C peak discharge rating, and five-millimeter bullet connectors, it's built for racers who want reliable punch and efficiency in a lightweight ultra-low center of gravity (ULCG) layout.

About the Pro Series MSV 5.0


Race-Focused Power Delivery

This MSV 5.0 pack uses Fantom's Pro Graphene LiHV chemistry to maintain strong voltage under load, giving your system crisp throttle response and predictable feel throughout the run. The flatter discharge curve helps eliminate late-race fade, while the low-resistance design improves efficiency for smoother, more controlled power delivery. Its ULCG profile supports balanced chassis setups, making it a strong choice for competitive drivers who want consistent performance across demanding track conditions.

Features:

  • Fantom Pro Graphene chemistry maintains higher sustained voltage
  • Flatter discharge curve supports consistent power
  • Lower internal resistance improves efficiency
  • ULCG profile helps optimize chassis balance

IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

  • DO NOT leave a battery in your model when charging
  • DO NOT leave lithium batteries unattended when charging
  • ALWAYS balance charge lithium battery
  • ALWAYS use a LiPo Safe charging bag/box
  • YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
  • YOU MUST not over discharge lithium battery packs
  • READ & UNDERSTAND the instructions carefully before operating this battery

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

Includes:

  • (1) Pro Series MSV 5.0 2S Graphene LiHV ULCG 160C Battery (7.6V/6200mAh)

Specifications

Nominal Voltage: 7.6V (2S)
Capacity: 6200mAh
Maximum Charge Rate: -
Discharge Rates
Continuous: -
Peak: 160C
Cell Configuration: -
Watt Hours: 47.1Wh
ROAR Approved: Yes
Connectors
Battery: 5mm Bullet
Balance: 2mm Bullet
Dimensions (LxWxH): 5.43x1.85x0.77in (138x47x19.5mm)
Weight: 8.18oz (232g)
CA Residents Prop 65 Warning WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...

Reviews

No reviews yet.

Builds using this part

No builds use this part yet — add it to yours from the build editor.