Furitek Python X 80A Brushless ESC & Motor Combo (Perentine) w/Wireless Module
About this part
Furitek Python X & Perentine 1950KV Combo
The Python X builds on the success of its predecessors the Lizard and Python by offering massive power capabilities and precise control for navigating challenging terrains with its smooth throttle response and use of FOC technology ensure realistic, steady movement. Furitek brings unique wireless features to the table with the ability to adjust throttle, braking, and punch settings on the fly via the FuriCar app.
The Perentine Brushless Inrunner Motor, tailored for RC crawlers, boasts potent low-speed torque. Its compact design optimizes space in the crawler chassis, ensuring efficient power transfer and extended battery life. Combined with the high-performance Python X conquer challenges, explore new terrains, and take control like never before. Elevate your crawling with the innovative Python X 80A Brushless ESC and Perentine Combo, your trusted off-road powerhouse.
Features:
- Python X
- FOC (Field-Oriented control technology)
- CNC aluminum case
- Water and dust resistant
- High current protection
- Live telemetry
- Audible alerts for easy diagnosis
- Updated Algorithm for smooth startup to FOC stage
- Removable power switch
- Brushed and Brushless compatibility
- Perentine
- 10 Pole high-torque motor design
- IP67 Waterproof rating
- Precision balanced rotor for best reliability and maximum RPM
- CNC machined 6061 T6 billet aluminum heatsink built into the motor housing
- Precision engineered for maximum energy conversion
- High purity and higher temperature single copper windings
- Excellent heat dissipation for maximum efficiency
Specifications:
- ESC:
- Application: 1/10
- Length: 1.7in (45mm)
- Width: 1.0in (25mm)
- Height: 0.4in (10mm)
- Weight: 1.4oz (41g)
- Input Voltage: 7.4-14.8V
- Continuous Current: 80A
- Burst Current: 120A
- BEC Output: 5.5-8.4V
- Input Lead: XT-60
- Motor Leads: 4.0mm Bullets
- Motor:
- KV: 1950KV
- Pole: 10
- LiPo: 2-4S
- Resistance: 0.7ohm
- Shaft Diameter: 3.17mm
- No Load Current: 4.0A
- Size (Diameter x Length): 36x48mm
- Weight: 180g
- Application: 1/10 Crawler
Includes:
Reviews3.5 · 10 reviews
Would be 5 but the esc is NOT waterproof. I almost found out the hard way. U can wash etc. DONOT submerge esc. Quality outstanding,slow crawl powerful and consistent. Slower then a fusion pro. Plenty of wheel speed when you want it. App is the best,love being able to mess with stuff on the fly. Ease of use also to note. Great esc and motor
Amazing control. I have all versions of the Fusion combos, several Revolvers, and many other combos. I like to try lots of options. This combo in my Gmade BOM has INSANE low speed control. The BOM has a very quiet and free drivetrain and this combo is also very quiet. Amazing control through the entire rpm range and plenty of power when needed. Running a direct power servo so unfortunately not able to take advantage of the substantial BEC. Bluetooth programming is where it’s at!!
This setup is junk. Extremely disappointed. It shuts down and restarts constantly during minor running. I haven’t changed any of the factory voltage or thermal protections. It is impossible to lower the reverse throttle amount from 100%, no matter how much you lower it or try to change it, it defaults to 100%. The ramp from slow reverse to full throttle is almost flat. The slow crawl is very good, but the constant restarts is a huge concern.
It's great super slow crawl tons of power. Water proof for sure I drowned it.
I knew this motor would be a tight fit in my CCW J&H but it does fit. The first thing you immediately notice is the lack of noise. I've got half a dozen outrunner trucks with silent ESC's and it's not even a comparison. Being able to watch the temps with the app is also more useful than I would have thought and the app overall is pretty easy. The only thing I adjusted from the furitek profile was the throttle curve in reverse. In my opinion, the lack of noise overall definitely makes the combo feel like the slow crawl is smoother than any of my outrunner setups.
Reviewers broadly praise the combo's very low-speed control, smooth crawl, and plenty of torque when needed, and many highlight the Bluetooth app for on-the-fly adjustment and temperature monitoring. Noise is a point of disagreement: several owners report the ESC is silent and the motor quiet, while others, especially one using a transmission in a custom build, describe the motor as loud. Reliability and programming reports are mixed. One owner reported repeated shutdowns and restarts, and another found the reverse throttle setting could not be lowered from 100%. One reviewer said the ESC is not waterproof, while another said it survived being submerged. One reviewer was unable to get the system working and preferred a competitor's ESC.
- + Very low-speed crawl control
- + Plenty of power when needed
- + Bluetooth app for on-the-fly adjustment
- + Quiet ESC and motor in many installs
- − Motor noise reported as loud in some installs
- − Shutdowns and restarts reported in one case
- − Reverse throttle limit could not be lowered
- − Waterproofing reports conflict