Futaba GYD470 1/10 Electric Drift Car Gyro
About this part
Gyro Overview:
This is the GYD470 1/10 Electric Drift Car Gyro from Futaba. Designed specifically for RC drift car enthusiasts, this gyro enhances steering precision and control with a compact, lightweight design. It features remote gain adjustment, easy setup, and compatibility with S.Bus/S.Bus2 for optimal integration with Futaba systems.
Note: The GYD470 has been designed for use with Futaba Transmitters, receivers and servos. GYD470 may not work properly with other non-Futaba combinations.
Features:
- Dedicated RC drift car setting for improved performance
- Remote gain function and mode switching for flexibility
- Compact and lightweight design for easy installation
- Supports S.Bus/S.Bus2 connection for seamless integration
- Simple setup for user-friendly operation
Specifications:
- Operating Voltage: DC 4.2-8.4V
- Dimensions: 0.8x0.8x0.43in (20.5x20.5x11mm)
- Weight: 0.13oz (3.7g)
- Compatibility: Futaba Transmitters, receivers, and servos
Includes:
- (1) GYD470 1/10 Electric Drift Car Gyro
- Assorted Wiring & Mounting Accessories
Needed to Complete:
- Compatible Futaba transmitter, receiver, and servo
Reviews2.0 · 3 reviews
I am running the GYD470 in a Redcat RDS with a Futaba 7PXR transmitter, R334SBS-E receiver, and a AFGRC A50BHL servo. Once the transmitter and receivers were fully updated, the gyro is working great! Running it on s.bus using the rotary dial on the radio to control channel 3, the gyro gain is easily adjusted and noticeable. With some servo tuning, I can get quick and solid hold with the gyro with little to no wandering and twitching. I do wish that Futaba was more clear on what specifics are needed to get this gyro to work, but once it's setup, it works great.
From my understanding, this gyro will not function with lower-end transmitters. It is very specific about your transmitter protocol. I have this gyro paired with the ReveD RS-ST and I do not get any steering from my transmitter (Radiolink RC4GS). Steering works just fine with the servo plugged directly into the receiver. Very disappointed with this product, I would stay away from it unless you run a futaba transmitter. Even then I have heard issues.
only works with Futaba radio. It would be nice if they said that in the ad
Reviewers agree the GYD470 requires a Futaba transmitter and receiver setup to function. One reviewer using a full Futaba system (7PXR, R334SBS-E) reported strong results after updating firmware, with gyro gain adjustable via a radio dial and solid heading hold after servo tuning, though they felt setup requirements were unclear. Two verified owners using non-Futaba transmitters reported no steering input, with one stating the gyro is incompatible with their Radiolink radio. Both criticised the listing for not stating the Futaba-only requirement. The reviews are few and split by transmitter brand, so the compatibility picture is limited.
- + Solid heading hold after tuning
- + Gyro gain adjustable from radio
- + Works well with full Futaba system
- − Only works with Futaba transmitters
- − No steering with non-Futaba radio
- − Compatibility requirements unclear in listing
- − Setup requires firmware updates and tuning