GooSky S1 Cyclic Servo

I damaged a cyclic servo (OEM) on my Goosky S1 after a crash. To install the this replacement, it made more sense to remove the control horn of the new servo, so after centering the unit (plug in and power up w/ Tx on, sticks centered, trims set to 0, then power off) I attempted to remove the bolt that holds the horn in place w/ Goosky 1.5mm tool. The bolt just turned, as it was stripped from the factory! Carefully, I applied upward pressure under the horn w/ a flat-head screwdriver and along w/ the 1.5mm tool, I was able to get the bolt out. The servo head is metal, so I hoped it was only the bolt that was damaged. I used the horn bolt from the original servo, and it snugged right up. Lucky, on that one!

Two servos and the FBL controller have failed in one month. I have heard through others the OMP 1 servos work on this model. Overall it is a nicely built heli and I enjoy the stabilization and bluetooth config App. The tech support from Amain tech support is also excellent.