Hobbywing QuicRun 8BL150 G2 Sensorless Brushless ESC/4268SL Motor Combo (2600kV)
About this part
QuicRun Sensorless Brushless ESC & Motor Combo
The Hobbywing QuicRun WP-8BL150 G2 ESC is Designed to electrify your experience so you can take on the most demanding conditions, this waterproof brushless combo is perfect for any entry level race buggy or bashing applications. The advanced G2 technology ensures seamless integration between the ESC and motor, delivering a powerful and efficient performance. With rugged durability and cutting-edge features, the QuicRun WP-8BL150 G2 is your gateway to an exhilarating experience that's ready to conquer any terrain.
Experience a new level of performance with the QuicRun 1/8 SL G2 Motor from Hobbywing. Designed for 1/8 scale vehicles, this motor boasts impressive power and efficiency, making it a must-have for any entry level race buggy or bashing application. The high-quality construction ensures durability and reliability, while the precise engineering guarantees smooth and consistent operation.
Features:
- ESC
- Extreme performance
- Powerful built-in BEC
- Efficient cooling system
- Capacitor Thermal Protection
- Built-in capacitor
- IP-67 waterproof Rating
- Motor
- 4-pole rotor design for more torque with strong explosive force
- sensorless interface
- Precision CNC shell
Specifications:
- Scale: 1/8th
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensorless
- Waterproof: IP-67
- Current:
- Continuous: 150A
- Peak: 950A
- Input Voltage: 3-6S LiPo
- BEC Output: 6V/7.4V @ 6A
- Output Connectors: 4.0mm Bullets
- Dimensions: 2.3x1.8x1.59" (60x48x40.4mm)
- Weight: 5.9oz (169.5g)
- Motor:
- Input Voltage: 3-4S LiPo
- KV: 2600kV
- Pole: 4
- Motor Diameter: 1.65" (42mm)
- Motor Length: 2.69" (68.4mm)
- Shaft Diameter: 0.20" (5mm)
- Shaft Length: 0.73" (18.5mm)
- Front Bearing size: D16*D5*T5
- Rear Bearing size: D13*D5*T4
- Weight: 417g
Includes
- (1) QuicRun 8BL150 G2 Sensorless Brushless ESC
- (1) QuicRun 4268SL Sensorless Brushless Motor
Reviews4.3 · 3 reviews
Good upgrade to Rival MT8 running the biggest badlands. Another good deal at amain.
I don’t have a lot of experience with 1/8 motors/esc’s so take that into account. Bought this for my mp10e readyset to mainly drop a pinion 13 to 12 and hopefully lower temps while maintaining punch and top speed. Temps went down and top speed went up and gained alittle more than a minute runtime. I had to turn the punch setting to 9 cause it was so ridiculously delayed that you couldn’t correct in air but that’s typical with hw imo. So for the price I’m happy with it. If anything happens I’ll update review as needed.
Nice combo for the price. But delay is very bad. Mojave 4s stock gearing
Three verified owners rated this 1/8 combo 3 to 5 out of 5. Reviewers agree it offers good value for the price and are satisfied as an upgrade over stock setups. Two owners tested it in 1/10-scale and 1/8-scale applications, one reporting lower temperatures, higher top speed and slightly longer runtime after a pinion change. The recurring complaint is throttle response: two reviewers describe noticeable delay, one needing to lower the punch setting to 9 to make in-air corrections. One reviewer notes limited experience with 1/8 systems. Overall sentiment is positive but tempered by the delay issue. The sample is small.
- + Good value for the price
- + Lower temperatures after gearing change
- + Higher top speed and slightly longer runtime
- − Noticeable throttle delay
- − Punch must be reduced for control in air