Horizon EC2 1/24 2.4Ghz ESC/Receiver
About this part
Horizon EC2 1/24 2.4Ghz ESC/Receiver. Package includes one ESC/Receiver unit.
NOTE: This ESC/Receiver is not compatible with all SCX24 models. This only compatible with the Horizon 4-Channel Transmitter (HRZ00014). This is included with the Axial SCX24 AXI00002V2T1 & AXI00002V2T2 models.
Reviews3.7 · 7 reviews
got my ESC jittering, and rolling backwards + left turn. Not reacting on any trim. Replace a servo, thinking it's dead. Now, after replacing an ESC and seeing same issue, before ordering the transmitter, I just replaced a batteries here. Now I have a spare ESC and spare servo. So for some reasons, instead of just turning off the Horizon's transmitter sends full backwards throttle and full turn, while on dead batteries, be aware!
Honestly not a good impression. Ive had two now and the first one rolled backwards on its own even after being trimmed. Then it started making my emax servo jitter really bad even at straight. And now the second esc ive had for maybe a month and now the servo is jittering again. Not sure what the problem is but horizon support is always helpful i will absolutely give them that.
I have bought this esc/receiver twice, as an upgrade for my v1 scx24s, it make a word of difference, i would highly recommend for most brushed users.
alright esc for stock axial just MAKE SURE YOU PLUG THE MOTOR AND BATTERY INTO THE RIGHT PLUGS, fried two motors and esc's that way XD
I have 2 SCX24's with these receivers my grandsons have thoroughly product tested LOL. My grandsons just arrived for another visit and both SCX24's powered up with completely random behavior. Thanks to another posters review here I checked the transmitter batteries and sure enough, they were really run down. New batteries and everything is running great. So, warning, the stock SCX24 transmitter gives little indication that the batteries are run too far down.
Reviews are mixed, averaging about 3.9 out of 5 across seven reviews. Several owners report success after upgrading from stock electronics, and one describes it as a major improvement on a brushed SCX24. Others report recurring problems: servo jitter, unexpected rolling or turning, and a unit that did not respond at first power-on. Two reviewers who had replacement units reported similar issues, and one noted that low transmitter batteries caused erratic behaviour. Some reviewers say the problems were resolved by fresh batteries, while others describe repeat failures. One reviewer notes that the support team was helpful. One reviewer notes a wiring mistake that damaged motors and the ESC. Reviews do not clearly identify a single cause for the failures.
- + Significant upgrade over stock electronics
- + Smooth operation on V2 electronics
- + Easy binding with used transmitter
- + Helpful manufacturer support
- − Servo jitter reported
- − Unexpected rolling or turning
- − Unit unresponsive at first power-on
- − Repeated failures after replacement