Hot Racing 12mm to 17mm Hex Hub Adapters (4) (6mm Offset)
About this part
This is a pack of Hot Racing 12mm to 17mm Hex Hub Adapters, with a 6mm offset. These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs and allow the use of 17mm hex wheels, all while adding a 6mm width extension per side of the vehicle for a wider, more stable, stance.
Features:
- CNC machined solid billet aluminum construction
- 12mm hex to 17mm hex conversion
- 6mm offset extension per side
- 17mm wheel nuts
- Adapters are anodized silver in color, wheel nuts are anodized black
- Wheel nuts feature an internal o-ring to maintain the nut position, even under the most severe conditions
Specifications:
Total length: 20mm
Max axle diameter: 5mm
Axle thread: M4
Hex depth: 5mm
Comments: See Hot Racing HRARSSLF117X for replacement/spare M4 axle hub nuts; O-rings are 11x1mm.
NOTE: These adapters fix a wide array of vehicles. Make sure the vehicle uses a hex at least 5mm thick, or the adapter may bind against the hub.
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews3.3 · 3 reviews
They need to be Machined, and they still come loose
These work if you want to run 17mm on your traxxas extreme hd shafts!
The inner collar nuts do not fit the axle of my SC10. Measured with my caliper and they are of by a little bit. Gonna be a return for me. Gonna look at other brands
Three verified owners reviewed the 12mm to 17mm hex hub adapters (4) with 6mm offset, with ratings of 3, 5 and 2 out of 5. One reviewer reports that the adapters need machining and still work loose. One reviewer found the adapter works for running 17mm wheels on Traxxas Extreme HD shafts. One reviewer found the inner collar nuts did not fit the axle on an SC10 by a small measured margin and planned a return. The reviews disagree on fit and suitability, and the sample is too small to show how common each issue is.
- + Works for 17mm hex on Traxxas Extreme HD shafts
- − Reportedly needs machining before use
- − Adapters can come loose
- − Inner collar nuts did not fit an SC10 axle