JConcepts
JConcepts B74 Aluminum Rear Hub Carriers (Blue)
Part # JCO2536-11.0(1)
Where to buy
$18.09
Prices are as last seen at the store; stock is not tracked.
About this part
JConcepts B74 Aluminum Rear Hub Carriers are precision machined to accept the stock AE hub inserts and also the aluminum camber link mount. One of the highest impact items on the rear of the B74 are the hub carriers and the aluminum material helps maintain correct geometry while showing off some anodized luster.
The package contains the hub carriers and two .1 and two .25mm axle shims to tighten the lash between drive axle and bearing once assembled. Once the assembly is together and the hex adaptor secured it’s time to add other pre-existing components. Slide the plastic hub inserts in the hub while carefully watching the alignment and setting of the hub carrier position. Next, use the standard FHCS hub carrier screws and aluminum camber link mount and then choice of spacer to determine setup positioning.
Features:
- Precision machined aluminum
- Lightweight / durable design
- Chamfer highlight edging
- Available in blue anodized color
- Aesthetic, race- ready jewelry
Reviews1.0 · 1 review
TVerified owneron JConcepts B74 Aluminum Rear Hub Carriers (Blue)
Absolute trash, stay away from jconcepts aftermarket parts like this. This is 3 of 3 with them for me. First off these B74 hubs didn't include the shims for the bearings so there's tons of slop there, they needed extra machining above inside bearing for the camber link mount to fit and needed drilled and tapped for set screws in the insert area because of the slop there also. On the new B6.2 hubs I had to drill and tap for set screws in insert area because of all the slop the insert had on those hubs. I had to drill the hinge pin holes out for the hinge pin to even fit on their steel 28g B6/T6 bulkhead. Never again...
Builds using this part
No builds use this part yet — add it to yours from the build editor.