JConcepts CreepER Rock Crawler Body (Clear) (12.3") (Cab Only)
About this part
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
- The JCI CreepER photo truck is an Element RC Enduro with removed floorboards. The JConcepts team added another battery tray (ASC42003) to the rear to mount electrical and the receiver box. It’s important that the CreepER body is either mounted high enough to clear side-guards or floorboards, or its necessary to remove them all together to meet the narrow width of the shell. The truck is fitted with JConcepts JCO4008 prototype Fling King tires in green compound and mounted on JCO3413 Hazard aluminum bead-lock wheels. The front bumper used is the Axial AXI80125.
- To fit this body on a TRX-4 Sport or Enduro, you will need to remove the side pods and relocate all electronics to the center / front of the chassis. This body fits crawlers with a width of approximately 5" or less.
- The JConcepts tube bed is available via 3D printing from JConcepts on Shapeways. One part of each item is required to build a complete bed to fit on an Element Enduro. Hardware is not included.
- 2971-001 – Tube bed frame
- 2971-002 – Tube bedside, Left
- 2971-003 – Tube bedside, Right
- 2971-004 – Tube upright bed rack
- 2971-005 – CreepER cab mount plate
- 2971-006 – CreepER bed floor
- Cab only build and styling
- Pre-trimmed exterior around the cutlines
- Crisp front-end, skeleton like grille
- Angular, V-shaped structure
- Vintage, large single cab construction
- Flange style fenders, Military fit, and finish
- 1:1 headlight and grille treatment
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed JCI / CreepER decal sheet included
Reviews3.0 · 3 reviews
Body is very thin, it ripped right through my rear body holes the first roll over. I ended up having to reinforce and support it just so it lasted longer than a few runs.
Body looks nice but is very thin where the fenders meet the doors, mine was already starting to split. Had a few dings in it and the film was half peeled off. Good body if you're looking to do a patina build and plan on cutting the fenders off though.
What's a word to describe the CreepER... Basic? Basic Price, Basic Looks, Basic quality(its kinda thin at the bottom edges of the body) Its alright for the cost.
Three verified owners rated the JConcepts CreepER Rock Crawler Body (Clear, 12.3", cab only) 3/5. Reviewers agree the clear polycarbonate is thin, especially around the fender-to-door seams and bottom edges. One reported the body tearing at the rear body holes after its first roll-over, and another reported splitting and dings with a partly peeled film. Looks are described as nice but basic, and value is judged acceptable for the price. One reviewer suggested it suits a patina build with the fenders removed. The sample is small, so the durability findings rest on three reviews.
- + Looks nice
- + Acceptable value for the price
- + Suits patina builds
- − Thin material
- − Tears or splits at body holes and seams
- − Film peels easily
- − Basic overall quality