RCFeed Logo
Builds FeedParts FeedRC MarketplaceDiscussAbout Us
Parts/Wheels & tires/Tires (off-road)/JConcepts RC10 Mono 2.2 Rear Wheels (White) (4) (+Offset)
JConcepts RC10 Mono 2.2 Rear Wheels (White) (4) (+Offset)
JConcepts

JConcepts RC10 Mono 2.2 Rear Wheels (White) (4) (+Offset)

Part # JCO3404W4.0(2)
Tires (off-road)Landcraft
Fits
Team Associated RC10Team Associated RC10 B3
Where to buy
$12.75
AMain Hobbies
Seen Oct 12, 2026
$12.75Buy
Prices are as last seen at the store; stock is not tracked.

About this part

JConcepts Mono 2.2 Rear Wheels were developed to support the vintage RC enthusiast. The original offset rear wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape and utilize the pin drive setup for 3/16" axels.
 

JConcepts has taken the liberty of increasing the wheel width to the inside in order to accommodate today’s race tires. The wheels include a vent hole on the outer diameter and an added outer “catch” to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are molded in a durable material with precise techniques to ensure dependability and performance. 

Mono wheels are available in bright white and fluorescent racing yellow, packaged four pieces per package and backed with JConcepts racing heritage and customer support. 

Notes from the team
The inner hole diameter of the Mono wheels are designed for 3/16” axles with traditional pin drive setup.

Features:
  • Classic dish styling 
  • Popular 2.2” mounting bead diameter 
  • Available in bright white and fluorescent racing yellow 
  • Added width to accommodate modern tires
  • Durable material, precision molding techniques
  • Compatible with RC10, RC10B2 and RC10B3

Reviews4.0 · 2 reviews

AnonymousVerified owneron JConcepts RC10 Mono 2.2 Rear Wheels (White) (4)

They did not fit over the axle hub on the inside and the pin slot is to narrow for the original pins in the axle. They had to be drilled to compensate for the inside shaft diameter and the pin does not sit entirely in the slot. We will have to see how long they last with these modifications.they do not fit well.

2 found this helpful
Joseph Slomkaon JConcepts RC10 Mono 2.2 Rear Wheels (White) (4)

These wheels fit the updated 3/16" axles that are on the re-release rc10. I have the updated axles kit on my older car and these wheels work great. I dyed a pair of these black with some standard RIT dye and they turned out nice. J-Concepts has put out a number of good products that support the older rc10's.

1 found this helpful

Builds using this part

No builds use this part yet — add it to yours from the build editor.