M2C Tekno Delrin Bushing Insert (4) (+0.5/-1 Degree Offset)

This is a pack of four optional M2C Delrin Bushing Inserts for use with the Tekno 1/8 scale line of 8.3 vehicles. These bushings fit into the stock suspension blocks, BUT must be used with the M2C Tapered Hinge Pins - these do not work with the stock hinge pins!

These inserts are made using delrin material for long life performance compared to the stock injected bushings. Due to the design of these inserts and M2C tapered hinge pins, this system is designed for the hinge pin and arm to rotate in the bushing. Therefore, if you bend a hinge pin it will not effect the movement of the arm.

Remember that it takes 2 packs of bushings to do a complete car.

NOTE: If used on SCT models you will have to trim the rear bumper for clearance of insert.