MST FXX 2.0 S 1/10 RWD Electric Drift Car Kit (No Body)
About this part
The MST FXX 2.0 S 1/10 RWD Electric Drift Car Kit combines the centralized chassis configuration of the FXX 2.0 KMW, with a redesigned motor forward transmission configuration and front suspension system to create an amazingly progressive driving experience. This rear-wheel drive specific design is complimented by the unique MB rear suspension system that provides increased rear geometry adjustments, allowing the suspension to better handle steep drift angles with an optimized secondary reduction ratio for improved throttle control. All of these features combined create a high performance chassis that provides handling characteristics more like that of a 1:1 drift car.
NOTE: Wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
- Front motor configuration creates a feel similar to a real drift car, for a more realistic driving experience
- CNC machined chassis with readjusted center of gravity provides better weight distribution
- Updated motor mount, suspension and ATK system
- The integrated steering system with redesigned aluminum alloy steering connection plate updates the geometry settings to create steep front wheel steering angles, allowing for greater drift angles
- Equipped with MB rear suspension system for increased adjustments and tuning possibilities
- Steel CVD axle of rear transmission system
- Standard realistic caliper and disc brake set
- Full ball bearings
- Hydraulic Dampers
Camber: adjustable 0 to -12 degree
Needed to Complete:
- 1/10 Drift Body & Paint
- Motor & ESC
- 2 Channel Radio System (minimum)
- Steering Servo
- Shorty LiPo Battery & Charger
- Wheels & Tires
Reviews5.0 · 4 reviews
The instructions were easy to follow. There was no real issues with the build if you have built a kit before it will be easy. Only issue I have come across is if you want to change the motor out for what ever reason. Its more steps then an rmx or yd2 kind of car because the gear adjuster is in the way of the motor screws. Kit setup has worked great for me and where I am using the car.
A great entry level kit. Have started building and seems to be of good quality plastic and a few alloy bits thrown in. Be aware that it does not come with pinion gear, I grabbed a 20t 48P for starters. Fast shipping as per usual from A Main, Cheers.
Great kit with amazing instructions, very easy to follow.
Absolutely love it came on time everything was there even had some extra pieces definitely recommend
All four reviewers are verified owners of the MST FXX 2.0 S 1/10 RWD Electric Drift Car Kit (No Body) and rate it 5 out of 5. Reviewers consistently describe the instructions as clear and easy to follow, and the build as straightforward for anyone with previous kit experience. The kit is described as good-quality plastic with some alloy parts. One reviewer notes that a pinion gear is not included and had to be purchased separately. One reviewer reports that changing the motor is more involved than on comparable kits, because the gear adjuster obstructs the motor screws. Reviewers also mention prompt delivery and that all parts were present. No disagreements appear among the reviews.
- + Clear, easy-to-follow instructions
- + Good-quality plastic with alloy parts
- + Straightforward build
- + Prompt delivery with all parts present
- − Pinion gear not included
- − Motor change requires extra steps due to gear adjuster