Muchmore Spin Bearing Lube (20ml)
About this part
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews5.0 · 3 reviews
I use this on all the bearings on the drivetrain and steering bearings on my 1/8th scale buggy. I use the bearing blaster after removing the bearings, then I let them dry out or assist with and air hose. After they are dry I lay them flat and apply the lube all the way around the bearing allowing the oil to settle into the cracks and saturate the bearings. After a few minutes I flip them over and repeat. I haven't had a single bearing failure since I started using this stuff. One note: make sure you have everything running smooth, ie. all the grit out of the bearing, prior to applying. I am sure there are other very comparable lubes on the market, this is just what I use every week or after a good hard weekend at the track. If you are bashing in dusty conditions, make sure to clean and lube more often. I made that mistake on another buggy.
Works well, i lube all the bearings in any kit im building with this stuff.
good stuff, i use it on rc heli shafts, tail main, once in few flights. all work smooth.
All three reviewers are verified owners who rate the 20ml Muchmore Spin Bearing Lube 5 out of 5 and use it on RC bearings. One reviewer applies it to buggy drivetrain and steering bearings after cleaning and drying them, reporting no bearing failures since adopting it. Another uses it on every bearing in kits they build, and a third uses it on helicopter shafts and tail main bearings every few flights. Reviewers describe the product as working smoothly, and one stresses that bearings should be free of grit before application. No criticism or disagreement appears in these reviews, though the sample is small.
- + Keeps bearings running smoothly
- + No bearing failures reported
- + Suitable for buggy and helicopter bearings
- − Needs bearings cleaned and dry before application