O.S.
O.S. GGT15 15cc Gas/Glow Ignition 2-Cycle Engine with Muffler
Part # OSM3A2005.0(1)
Where to buy
$409.99
Prices are as last seen at the store; stock is not tracked.
About this part
Specifications
| Width | 2.4" (70mm) center of mounting holes at mounting plate |
| Oil Type & Content | 2-cycle oil at 50:1 mix ratio |
| Bore | 1.091" (27.7mm) |
| Cylinders | One, Single |
| Plug Type | G5 |
| Type | 2-cycle gasoline airplane engine |
| Crankshaft Type | Threaded |
| Starter Type | Hand Held Starter |
| Carb Type | O,S, 61H w/PD-08 pump system |
| Prop Range | 13 x 8-11 - 15 x 6-8 |
| Displacement | 0.912 cu in (14.95 cc) |
| Engine (Only) Weight | 21.5 oz (610 g) |
| Total Weight | 27.7oz (788g) |
| Height | 6.1" (156.1mm) from bottom of mounting tab to muffler outlet |
| HP | 2.35 PS, 2.32 HP @ 15,000RPM |
| Crankshaft Threads | UNF5/16-24 |
| Muffler Weight | 6.28 oz (178g) |
| Length | 6.1" (156.2mm) from carb to front bearing |
| Muffler Type | 2-piece aluminum |
| Recommended Fuel | 87 - 93 octane gasoline |
| Stroke | 0.976" (24.8mm) |
| Ignition Weight | 3.70 oz (105 g) |
| RPM Range | 2,000 - 11,000 |
Reviews5.0 · 1 review
Gary AndersVerified owneron O.S. GGT15 15cc Gas/Glow Ignition 2-Cycle Engine with Muffler
I purchased this GTT15 cc engine for a retro fit in a old glow fueled plane. Have not installed it as of today. I bought this glow gas so I would not have to have a ignition system like the other gas engines as well as the carburetor is up front like a glow engine. I can not wait to finish the plane and see what she can do in the air. The engine is very well built and if it is anything like the OS glow engines I used years ago I will be very happy. OS engines is all I used back in the older days and never had any problems. I know for a fact I will not miss the oil and dirt like the glow engine put out. I purchased this through Amain hobbies because they had the very best pricing on the engine. Thank You Amain Hobbies. Gary Anders
Builds using this part
No builds use this part yet — add it to yours from the build editor.