OMPHobby
OMPHobby Charger Cable (1 in 3)
Part # OMP-OSHM10605.0(1)
Fits
Where to buy
$6.99
Prices are as last seen at the store; stock is not tracked.
About this part
This is an optional OMP Hobby M1 Charger Cable - 1 in 3 serial style.
This cable adapts the ability to charge three batteries at once, when using a 6 cell compatible charger. Each battery will plug into the female style JST XH (2s) connectors, and the charger will connect to the XT60 battery connector, and plug into a 6s JST XH connector on the balance side. The batteries will be charged as 6s.
For best results, it is suggested to not mix and match battery brands, and capacities. Batteries must be connected together with no more than 0.05V of difference to provide the minimum amount of balance time on the charger.
This cable adapts the ability to charge three batteries at once, when using a 6 cell compatible charger. Each battery will plug into the female style JST XH (2s) connectors, and the charger will connect to the XT60 battery connector, and plug into a 6s JST XH connector on the balance side. The batteries will be charged as 6s.
For best results, it is suggested to not mix and match battery brands, and capacities. Batteries must be connected together with no more than 0.05V of difference to provide the minimum amount of balance time on the charger.
Reviews5.0 · 1 review
Christopher KurrissVerified owneron OMPHobby Charger Cable (1 in 3)
Fantastic harness! I am able to charge Goosky S1 300mah [x3] batteries @ once, which is 3x faster than the single harness (that comes w/ the heli kit)! I did purchase 2s balance extension leads, so that the batteries can rest easily on the desk. My charger: ISDT K2 Air, 2- channel AC/DC unit.
Builds using this part
No builds use this part yet — add it to yours from the build editor.