Pro-Line RC Body Airbrush Paint Fluorescent Color Set (6)
About this part
Ready to Spray
This pre-thinned airbrush paint makes it easy to grab the color you want and spray without the hassle of mixing (using a 0.5mm tip @ 30psi).
Specially Formulated for Polycarbonate
Bash, Crash, Race or Show, Team Pro-Line has done it all! Pro-Line R/C Paint is a high-performance durable water-based airbrush paint that is specially formulated to meet the extreme requirements of polycarbonate R/C Bodies. It is durable yet flexible to allow R/C bodies to deform and come back to their shape. You will not only get great performance, you also get the same color options chosen by the experts.
Features:
- Professional Results
- Developed by R/C Painters for R/C Painters
- Specially Formulated for R/C Bodies
- Ready to Spray. Use right out of the bottle (using a 0.5mm tip @ 30psi)
- Spray Without the Hassle of Mixing
- Water Based
- Extremely Durable and Ultra-Flexible
- Easy to Use
- Many Color Options with More Yet to Come
- Made in the USA, since 1982
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews2.7 · 7 reviews
I'm baffled by the previous reviews, I don't know if they got a bad batch or just don't know how to airbrush. I liked the Pro-line paint so much that I now have every set they have available, actually I don't think there is a Pro-Line paint color out that I don't have. I still use my Faskolor paints, but only when the color isn't available from Pro-Line. If you have a .5 needle/nozzle you don't have to reduce, unless it's fluorescent, then you have to reduce a little, also about they paint scratching off and not wanting to cure,if you would give it 24 hours to dry, then spray a coat of Rust-Oleum clear coat, the paint won't scratch off. I've painted around 7-8 bodies now using Pro-Line Paints and have bashed the crap out of my trucks and haven't had any of them scratching or chipping. Sometimes it's not the paint, it's the one spraying it...
Absolute garbage. Did anyone at proline test this? Coats like garbage, dried on tip immediately and if you thin it for detail work out blows out. What a disappointment. Stick to created of faskolor.
Most of the colors work great and the final result is amazing. Regardless of skill level. Unfortunately some of the paints had congealed inside the bottles and I could not get the paints mixes or poured onto the air brush
Horrible Product! Paint would not dry even after 3 weeks, paint would easily scratch off with light fingernail pressure (proper painting practices) never had this problem with any other brand. UPDATE: been over 3 months and paint is still now fully dried, proline customer service was un-willing to take care of the customer properly. Now all the time and money for the new body and paint job is ruined.
Very confused. The paint looks good has no smell and sprays good. But the paint just comes off. Body cleaned well. Using .5 needle and at 30psi like it says but scratchs off rubs off and as it stands a couple runs and itll be a crap show of a body. Very dissapointing as i bought all the proline sets excepts the candy all that money, and as of now uselss unless u leavy body on display. Very angry
Reviews are sharply divided. Two 5/5 reviewers report good results with a 0.5 needle, noting fluorescent colours may need slight thinning, and one says paint cured after letting it dry 24 hours and sealing with clear coat. Several lower-rated reviewers report paint that stays tacky or takes weeks to cure, scratches or rubs off, dries on the tip, or runs too thick to spray without thinning. A 3/5 reviewer found the colours good once properly thinned, while another reported congealed paint inside the bottles. Multiple reviews describe customer service dissatisfaction after curing problems. Reviews reference this fluorescent set specifically and the reported problems are recurring rather than isolated.
- + Good colour coverage and vibrant colours
- + Works well with a 0.5 needle when thinned
- + Final finish considered attractive by some
- − Paint slow to cure and scratches or rubs off
- − Thick consistency needs thinning to spray
- − Paint dries on airbrush tip
- − Some bottles arrived with congealed paint