Pro-Line Trencher 2.8" Tires w/Raid 6x30 Wheels (2) (M2) (Black) w/Removable Hex
About this part
The Raid wheels feature a detailed 10-spoke design that recreates the latest in high performance full size forged racing wheels with the strength and durability to match the bold look. Molded-in bead-loc detail only adds to the realism. These wheels are proudly Made by Us in the USA and are destined to change the wheel game forever! If you only get one wheel and tire combo for your truck, this is the one you need!
Features:
- Tire:
- Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability
- Over-sized Tall Tread is Second-to-None in Durability and Longevity
- Extremely Detailed Sidewall for that Tough Off-road Look
- Official Pro-Line logo and Trencher Name Embossed on Sidewall of Tire
- Less Time Gluing and More Time Having Fun
- Award Winning Tread Design
- Made in the USA, since 1982
- Wheel:
- Removable Hexes Allow you to Change Wheel Offsets on the Fly
- Easily Replace Damaged Hexes or Upgrade to 17mm hexes
- The 2 Most Common Offsets are Included
- Fits any of Pro-Line’s 6x30 Removable Wheel Hexes
- Wheel Made from High-strength, Durable DuPont Nylon Material
- Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
- M3 Wheel Hex Hardware Included
Fits:
- Stampede® 2wd
- Stampede® 4x4
- Rustler® 2wd
- Rustler® 4x4
- JATO® Rear
Specifications:
Height: 4.87" (124mm)
Width: 2.86" (73mm)
Includes:
- (2) Pre-mounted Trencher 2.8” Tires on Raid Black 6x30 Removable Hex Wheels
- (2) 6x30 to 12mm Hex Adapters (Narrow & Wide)
- (12) M3 x 12mm long SHCS hardware
Reviews4.6 · 5 reviews
These tires do not fit properly on the front of the 2WD Stampede they rub when turnt fully left or right and on loose gravel or snow causes the tire to stop turning which decreases the overall steering and effects handling considerably. I would recommend getting longer A-Arms for the front end although they fit great on the rear end of the truck and are great for traction and do exactly as they suppose to and designed for!
Tons of traction! The “monster” truck look on a 10 scale is spot on and still drivable.
Ordered to tekno mt 410 2.0 . Running on 3s. A little ballooning. But haven't exploded yet.. had to trim the body a little..tires are legit
I bought these tires to convert Slash 4x4 into monster truck. But after installing them and bashing with it, I realized these are too heavy. For running at 35mph (2s lipo) they are good. But if you are running around at 45mph then slash become unstable.
Great tire for loose dirt, gravel, and short grass. Very sticky on pavement, but I would avoid running a lot on pavement, if you want the tires to last. I put these on my 2wd slash, that is powered by HW 3652 5400KV motor and Max10 ESC. A WOT the tires balloon pretty severely. Look aggressive. Definitely would purchase again.
Reviewers generally praise the Trencher 2.8" tires for strong traction on loose dirt, gravel and short grass, and for a monster-truck look on 1/10 scale trucks. Several note they grip well on pavement but wear faster if run on it a lot. Ballooning at high speed or on heavier power setups is mentioned by more than one reviewer. One reviewer reports rubbing and steering loss on the front of a 2WD Stampede, suggesting longer A-arms, while the rear fitment was described as good. Another found the tires too heavy for high speeds on a Slash 4x4, stable at about 35 mph but unstable near 45 mph. Reviews cover several chassis and power setups, so fitment and performance vary.
- + Strong traction on loose dirt and gravel
- + Monster-truck look on 1/10 scale
- + Good grip on pavement
- + Fits well on rear of Stampede
- − Balloons at high speed or power
- − Front rubbing on 2WD Stampede
- − Too heavy for high speeds
- − Wears faster on pavement