PSM B6.1/B6.1D Battery Positioning System V2 w/O-Ring
About this part
- Compatible with the Team Associated B6.1 / B6.1D
- Precision CNC machined in Germany
- Perfect Fit and ultra light
- High grade carbon composite
- (2) Carbon Positioning Brace
- (1) Steel Screw Kit
- (2) Industrial Rubber O-Ring
Reviews4.7 · 6 reviews
I grabbed 2 set of these psm. I was gonna use them in the team associated b6.2d and the 6.2 sct. I am using the smc 4000mah lcg battery's for both cars. It seem the battery are on the low side and will bounce up and down. This is no fault of psm at all if I had full size battery the rubber band would be nice and snug. Need to add some thicker foam or change battery to a thicker one. I do not see any fitting issure with the sct at all. The 6.2d if you run the battery all the way back you and use a fan you will need to mount the fan some where else. The fan and or the bracket get in the way of each other. I tired angel the fan than the body dont fit. I really like how I could grab my battery leads so much easier from the psm than the factory bracket. There machine finish on these where actually great on the set I have. I saying 5 star just cause of the fact they give you great instructions and all hardware needed for 2 different way of installing and the finish product. Got plenty of guy using these at the track with full size with out a problem. Some lcg might not have the height so be careful there when using lcg battery's.
Very battery holder upgrade for the B6.1. Holds the battery very snug and I like that you don't need tools to remove and install the battery. Not sure how long the O-rings will hold up over time, but already found some online for a few pennies so I got a few extra in case they break. I got this to replace a carbon battery brace that is the same style as the original plastic Associated one, but it ended up splitting across the layer lines. I believe this one will do much better over time.
High quality carbon fiber and machining but very hard to remove o rings.
this is one hella battery brace ill say! for those with the original b6 get this!!!!! Way better looking and easier to manage with the o-rings!
Fits great, works like a charm, great instructions. Made in Germany! Top quality. Also a good price. Buy it!
Reviewers generally rate this carbon fiber battery positioning system highly, with most giving five stars. Several praise its snug battery hold, tool-free battery removal and machining quality, and one describes it as good value. One reviewer found the O-rings hard to remove, and another questioned how long the O-rings will last, noting spares were inexpensive. One reviewer using a smaller 4000mah battery in a B6.2D reported the battery bounced in the holder and needed thicker foam or a larger battery, and a fan mounting clash in the B6.2D. Another reviewer said the fit in the SCT was fine. Reviews reference the B6.1 and B6.2 platforms.
- + Snug battery hold
- + Tool-free battery removal
- + High quality carbon fiber and machining
- + Good value for price
- − O-rings hard to remove
- − Long-term O-ring durability uncertain
- − Smaller battery can bounce in holder
- − Fan clearance issue on B6.2D