RC4WD Baer Brake Rotors & Caliper Set for Traxxas UDR (2)
About this part
- Billet Aluminum
- CNC Machined
- Black/Red/Silver Anodized Finish
Includes:
- (2) Brake Discs
- (2) Red Calipers
- (1) Baer Decal Sheet
Reviews2.3 · 4 reviews
The only reason this is not a one star review is because they look really good. Parts do not fit well. Calipers hole does not lineup with the stock axle carriers. I will have the remove material from the inside of the caliper to get the holes to line up on all 4 corners. Also the rotors pin slot is so deep that an extra 2mm of the unthreaded stub axle protrudes beyond the hex hub. This does not happen with the stock plastic rotors. I will most likely need to add a bushing shim between the bearing in the axle carrier and the RC4WD rotor to get it to line up the same as stock. Overall I am happy with the looks, but extremely unhappy with the fit of these.
china made junk! First problem holes did not come threaded had to use a tap and make my own threads. Second problem fronts do not fit deep enough into steering knuckle (you must remove material from the caliper). Third problem set had 2 of the same rotors so one side cooling vents face forward other side is backwards. Bear should be ashamed to endorse this product.
have no problem installing this part in my UDR and i like the looks and finish.
DO NOT ORDER. They look cool but the calipers are not threaded. This is junk.
Reviewers agree the rotors and calipers look good and finish well, but fit is the main complaint. Two reviewers report caliper mounting holes that do not line up with stock axle carriers or require material removal, and one reports the front parts do not seat deep enough in the steering knuckle. One reviewer says the caliper holes were not threaded and had to be tapped by hand, and another makes the same threading complaint. One reviewer reports a mixed pair of rotors with cooling vents facing opposite directions. One reviewer reports installing the set without problems and praises the appearance. Overall, reviews are mixed, with most negative reports centred on fit and hardware preparation.
- + Good looks and finish
- + Installs without issues for one owner
- − Caliper holes misaligned with stock carriers
- − Caliper holes not threaded
- − Front parts do not seat deep enough
- − Rotor pin slot too deep, stub axle protrudes