RC4WD Warn 9.5cti-s 1/10 Scale Winch (Miniature Scale Accessory)
About this part
- Cast Zinc Case
- Stamped Steel Components
- Working Spring Loaded Warn Hook
- Synthetic Winch Rope
- Highly Detailed
- Full Warn Decals Installed
- Can operate on 3 Cell Lipo
- Easily Rebuildable
- 3ft/.9M Rope Pre-Installed
- Same Mounting Locations as Bulldog Winch
- 30 Day Warranty
- (1) RC4WD 1/10 Warn 9.5cti-s Winch
- (1) RC4WD Warn Winch Pull Tag
- (4) M2.5x4mm SHCS (Black)
- (4) M2.5x6mm SHCS (Black)
- (1) Warn Decal Sheet
- RC4Z-S1092 - RC4WD "Warn" Wireless Winch Controller w/Remote & Receiver (Miniature Scale Accessory)
- RC4Z-S1089 - RC4WD Wired Winch Controller Unit (Miniature Scale Accessory)
Reviews5.0 · 3 reviews
Very nice, updated design and detail compared to the previous model. Check you order the right one as this one will not fit inside most RC4WD winch bumpers!
I love it! looks great and works smooth the mount holes are a bit to close to the winch and are a bit tricky to get the screws in but a little patience and made it work on the redcat gen8. Don’t forget to buy the winch control unit if you don’t already have one you need it to make this work.
Very high quality and powerful winch. I Tested it out and it could deadlight 3.5kg.
Reviewers rate the RC4WD Warn 9.5cti-s 1/10 scale winch highly, describing it as an updated design with more detail than the previous model, smooth operation, and good build quality. One reviewer reports it lifted about 3.5 kg in testing. Two reviewers note that the winch will not fit inside most RC4WD winch bumpers, so buyers should confirm the correct model. One reviewer found the mounting holes sit close to the winch body and are fiddly to fit screws into, and reported success on a Redcat Gen8 after patience. Another noted that a winch control unit is required for operation. Review volume is small.
- + Updated design and detail
- + Smooth operation
- + High build quality
- + Strong pulling capacity in one test
- − Does not fit most RC4WD winch bumpers
- − Mounting holes are tight and fiddly
- − Requires separate winch control unit