RPM B6/B6D "Flat" Front Arms
About this part
You can’t go fast if your suspension settings don’t stay locked in. With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander (we found as much as 0.003” or .076mm of clearance in the hinge pin holes of a stock set of new A-arms). Not with RPM A-arms! RPM hinge-pin holes are held to extremely strict tolerances, with no more than 0.0005” to 0.001” (.013 to .025mm) of clearance, an improvement of nearly 300%! They also use in-line screws to retain the outer hinge pins while they ditch the inside retaining screws for shoulders in the hinge pin holes. This results in a weight reduction of 1.75 grams per A-arm (or 3.5 grams per pair) less than stock!
Durability is also key to staying on-track! RPM customers have repeatedly reported that stock A-arms break easily. Whether bashing or racing, RPM A-arms are the toughest A-arms on the market so a rough landing or a hit from another competitor won’t take you out of the race!
With unmatched performance, extremely lightweight materials and the ability to hold your suspension settings even after a wicked wreck, RPM A-arms will get you across the finish line EVERY time!
Tech Notes: RPM81372 replaces stock Associated ASC91671.