Parts/Suspension & steering/Suspension arms & hubs/RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)
RPM
RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)
Part # RPM721524.5(2)
Fits
Where to buy
$9.99
Prices are as last seen at the store; stock is not tracked.
About this part
This optional set of RPM Black Losi Mini-T 2.0 Heavy Duty Rear A-arms are designed to replace the stock A-arms on your Losi Mini-T 2.0. These beefier A-arm are made of premium nylon material and are less prone to damage since the shock pivot ball is captured and no longer fully exposed.
Features:
- The inner hinge pin bosses are roughly 20% thicker than stock (and dramatically thicker than first gen Losi A-arms).
- RPM has increased the overall thickness of the A-arm by roughly another 25%.
- Support beams are consistent on thickness and are roughly 50% thicker than some of the thinner supports of stock Losi A-arms.
- Unique shock surround protects the lower shock bottom. It’s less prone to damage since the shock pivot ball is captured and no longer fully exposed.
Reviews4.5 · 2 reviews
Rahman PVerified owneron RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)
These arms will work on both the Mini-B and Mini-T. For them to work properly on the Mini-B the arms must be flipped to have the lower shock mounts in the front. The most critical thing is they will bind bad on the rear camber block and chassis. To resolve this use a Dremel or X-Acto blade like I did to shave some of the material away to make the arms fall and operate in a free manner then you are set. I hope this helps others.
1 found this helpful
Bruno SAADAVerified owneron RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)
Stronger and better look than stock arms...great upgrade !
Builds using this part
No builds use this part yet — add it to yours from the build editor.