Parts/Drivetrain/Pinion gears/RPM Pinion Case (Black)
RPM Pinion Case (Black)
RPM

RPM Pinion Case (Black)

Part # RPM804124.0(5)
Where to buy
$8.99
AMain Hobbies
Seen Oct 12, 2026
$8.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

This is a Pinion Gear storage case from RPM.  RPM's pinion gear case includes a peel-off decal sheet with two handy pinion to spur gear ratio charts for both 48- and 64-pitch gears.

Reviews4.0 · 5 reviews

John Melloon RPM Pinion Case (Black)

Have used this pinion case for a couple of years. The case holds 15 pinions IF you use small pinion gears. With the bigger pinions(25+) you will not be able to hold as many. The posts are somewhat brittle if you aren't careful or if it the temp is cold. I've broken one post when I wasn't paying attention. If you are careful you will not have any problems, but who is careful all the time? The case should be bigger or the posts should be spaced farther apart. The plastic also needs to be less brittle. You will have to buy another if you use it long enough. If you can get a metal one, you might want to. Up to you if you use it often or don't mind buying replacements. I personally like to buy once, so I tend to buy expensive. Writing a review since I'm purchasing one from another brand.

1 found this helpful
Jay GVerified owneron RPM Pinion Case (Black)

I had all my pinions wrapped in plastic and in a case. Now I have them in this box which is handy. As others have said, tall pinion gears will not leave you much room In the 20's you will be fine. The plastic shaft/pin is 1/8" for smaller pinions. Don't use the set screw, mine is full and I need another lol. Only bummer - no spot for spur gears...

Zaid Al-NahiVerified owneron RPM Pinion Case (Black)

Does the job and is functional - other cases might look nicer but this was the most practical for the space i have as a workstation - if i had more space i would invest is something more expensive. but for the price and function its the best i could find. Good case for small workstations

MCVerified owneron RPM Pinion Case (Black)

The pinion case is a nice idea, unfortunately the plastic pins broke away easily. I can't recommend.

Christopher RobinsonVerified ownerMay 31, 2017on RPM Pinion Case (Black)

nothin fancy... RPM quality... Does what it says and keeps them neat and organized...

What reviewers say

Reviewers generally find this black pinion case practical and affordable for organising pinion gears, particularly on small workstations. Capacity is the most cited limitation: reviewers say it holds about 15 pinions if they are small, but fewer larger ones (25 teeth and up), and that tall gears leave little room. The plastic posts are a recurring concern, with one reviewer reporting a broken post and another reporting that pins broke away easily; reviewers note they are brittle, especially in cold temperatures or when handled carelessly. Some reviewers would prefer a metal version or a larger case, and one notes there is no space for spur gears. Opinions are mixed, with ratings ranging from 2 to 5 out of 5.

  • + Practical and organised storage
  • + Good value for the price
  • + Compact for small workspaces
  • + Keeps pinions neat
  • − Limited capacity for larger pinions
  • − Brittle plastic posts that can break
  • − No space for spur gears
  • − Tall gears leave little room
Summary generated from the reviews above.

Builds using this part

No builds use this part yet — add it to yours from the build editor.