Scale By Chris Hood Mount Injection

The Scale By Chris Hood Mount Injection is a 3D printed miniaturized detail option that will add that perfect finishing touch to your scale rig or monster truck. This fuel injection can be installed directly to the surface of the body, securing with M2.5 hardware, or a hole can be cut in the hood, allowing the intake stacks to poke through, and glue in place. The complete unit measures approximately 53x43x10mm. 

Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.