Scale By Chris Hood Mount Turbo (Left)

The Scale By Chris Hood Mount Turbo is a 3D printed miniaturized replica that adds that perfect high horsepower element to your scale build. This left side is black and unfinished, so you can detail it how you prefer and features a two piece design with the turbo and air cleaner being two separate components. The complete turbo assembly measures approximately 49mm long and 29mm wide and installs on the passenger side of the hood. The turbo is secured by drilling a hole in the hood and using a screw to hold the turbo in place (hardware not included).

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.