SSD RC SCX10 II Pro Aluminum Knuckles (Black)
About this part
Features:
- CNC machined aluminum
- Anodized black (SSD00144) or silver (SSD00148)
- Fits optional SSD brass knuckle weights (SSD00140)
- Fits stock Axial SCX10 II AR44 C hubs, bearings & hardware
- Optional matching SSD Pro Aluminum C hubs for SCX10 II are available in black (SSD00145) or silver (SSD00149)
- 1 pair (Left, Right) Pro Aluminum Knuckles (Black)
- (4) Brass sleeves
- (4) M3 x 10mm screws
- (1) M3 x 14mm screw
- (1) M3 x 20mm screw
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews3.7 · 3 reviews
Were these 2 knuckles even made on the same machine in the same country? They are totally different fitment and I am out bearings, have a marred knuckle and am now out 40$. One was so loose it could barely hold a bearing in place, they other you almost had to hammer in the bearings and even then they wont come out if you need to change them. This on top of the fact that I tried mounting them to the ssd c-hubs and I wound up with 2 utterly different steering radius options because one knuckle swung freely, the other bound up and was firm at best. In any hobby a bit of filing can help so I gave that a shot but no luck. When I emailed ssd for a bit of help they gave me some half baked response about one of these issues and basically told me I was out of luck, sucks to be me. Find a different option, ssds mad reputation is misplaced at best.
I purchased these for a Gmade GS02 BOM along with the weights and they fit and function perfectly. Don't get the one piece weighted knuckles from SSD for the GS02 platform because you'll lose half of your steering angle.
no problems with it yet easy to install fits perfectly on ssed pro44 axles
Reviews are mixed. One reviewer reports that the two knuckles in their pair had noticeably different fit: one was loose enough to barely hold a bearing, the other needed force to seat and would not easily come out, and the knuckles produced different steering radius when mounted to SSD C-hubs. Filing did not resolve it, and the reviewer said SSD's support response was unhelpful. Two verified owners report good fit and function, one on a Gmade GS02 build and one on SSD Pro44 axles, with the GS02 owner noting that the one-piece weighted knuckles from SSD reduce steering angle on that platform.
- + Fits and functions well for some builds
- + Easy installation reported
- + Fits SSD Pro44 axles
- − Inconsistent fit between left and right knuckles
- − Bearing seat too loose or too tight
- − Mismatched steering radius on C-hubs
- − Reported customer support response unhelpful