SSD RC Yeti Rear Trailing Arm (Grey)
About this part
Features:
- CNC machined aluminum
- Scale design
- Anodized Grey
- Threaded shock mounts
- Rod ends fit inside housing
- Durable plastic rod ends with steel ball (SSD00017)
- Direct fit onto Axial Yeti, RR10 Bomber and SMT10
Length (eye to eye): 141.5mm
Length of aluminum arm: 113.5mm
Internal thread: M3
Weight: 31g
Includes:
- (2) Assembled aluminum trailing arms
- (2) M3 x 12mm button head screws
- (2) Spare plastic rod ends
Reviews5.0 · 3 reviews
Nice little trailing arms at a fair price. I've heard that replacing the 15mm long screw on the rod end with a 20mm makes then less likely to have rod end failures. Mine are holding up swell thus far on am SMT10.
I use this set on my axial bomber, as someone else in the comments suggested, I changed the m3 screws from 15mm to 20mm, and doing great so far. I use my bomber as bouncer, racer, crawler, and basher, with a hobbywing axe 2800kv combo and 3s battery.
Extremely good piece for the price. Direct fit, zero deflection like the original plastic piece and they take out alot of slop in the original plastic links and shock ends.
All three verified reviewers rate the SSD RC Yeti Rear Trailing Arm (Grey) 5/5 and describe it as good value for the price. Reviewers report a direct fit, reduced flex compared with the original plastic arms, and less slop in the shock ends and links. Two reviewers, both running it on different models, mention swapping the 15mm rod-end screw for a 20mm screw, which they say reduces the likelihood of rod-end failure; one of them says the change came from a suggestion in the product comments. Reviews are short and cover limited use, so long-term durability is not established. All reviews refer to the Grey variant.
- + Good value for the price
- + Direct fit
- + Less deflection than original plastic arms
- + Reduces slop in shock ends and links
- − Rod-end screw reportedly prone to failure at stock 15mm length, with 20mm swap suggested