Team Integy Universal Setup Station "Type J" Adapter Set for Traxxas 1/16
About this part
This is the Team Integy Universal Setup Station "Type J" Adapter Set.
Type J Adapters (C23344) Fit: Traxxas 1/16 scale vehicles.
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews4.7 · 3 reviews
This is the set of adapters needed for use with the Associated RC10B6.2. The plate included is slightly too short for the width of these buggies, but you can still eyeball toe-in by putting the plate as close to correctly as possible. It would be nice if the plate were slightly wider, but it kinda works. The adapters are the correct thread and pitch though.
If this bar is anywhere from 53-63mm long it will work for 1/10 touring car which is what I want right now.
These are the adapters you need for the Caster S10b pro v3, the bar doesn't work for toe though but this set wasn't advertised for 1/10 cars. Integy needs one of these bars to work for toe on 1/10 cars. It isn't in the setup station kit and it isn't this one.
Reviewers describe this adapter set as having the correct thread and pitch for certain 1/10 touring cars, including the Associated RC10B6.2 and the Caster S10B Pro V3. One reviewer reports the included plate is slightly too short for the width of the RC10B6.2, requiring toe-in to be estimated by eye, and would prefer a wider plate. Another reviewer notes the bar works for toe-in only if it measures roughly 53-63mm, which they say suits 1/10 touring cars. A verified owner states the bar does not work for toe on 1/10 cars and that the set was not advertised for them. Reviewers agree the adapters fit, but disagree on whether the plate and bar are suitable for toe setup on 1/10 cars.
- + Correct thread and pitch for the adapters
- + Adapters fit the Associated RC10B6.2
- + Adapters fit the Caster S10B Pro V3
- − Included plate is slightly too short for the RC10B6.2
- − Bar does not work for toe on 1/10 cars, per one verified owner
- − Toe-in must be estimated by eye with the included plate
- − Not advertised for 1/10 cars