Tekin RS Pro Black Edition BL 1S 1/12 Sensored/Sensorless Brushless ESC
About this part
The RS PRO Black Edition 1S was specifically designed for 1S 1/12 Scale Spec Classes to take full advantage of the ULR circuit design. ULR FlexWire is included with every Black Edition ESC. Pair the RS PROs with a SPEC-R motor for the ultimate Ultra Low Resistance system.
Features:
- ULR: Ultra Low Resistance Design
- Specifically Designed for Spec & Stock Racing
- QuickTune™ One Touch Programming
- Adjustable Throttle and Brake Frequencies *
- High Voltage Programmable BEC *
- HotWire™ Programming Port *
- Data Logging Capability *
- Sensor Checker
- On-Board Temperature Indicator
- ESC Self Diagnostics with Error Codes
- Fully Proportional Forward/Brake/Reverse
- Brushless and Brushed Motor Drive
- Sensored or Sensorless Operation
- LiPo Safe with Custom Voltage Cutoffs
- Sensor Plug for Precise Commutation
- Lightweight Chassis Design
- HDAC: High Density Copper PCB's
- Ultra-smooth and Precise Throttle and Braking Control
Specifications:
Controls: Forward/Brake/Reverse
Input Voltage RS Pro 1-S: 1S LiPo ONLY / 4S NiMH-NiCD
Motor Limit Brushless Mode 2S: 36mm Can - 2-Pole
Motor Limit Brushless Mode 3S: 36mm Can - 2-Pole
Motor Limit Brushed 2S: 36mm Can - 540 & 550
Motor Limit Brushed 3S: 36mm Can - 540 & 550
Amperage: 480Amps per phase*
ON Resistance: .000096ohm*
BEC: 6.0 / 7.4V @ 5.5amps
Weight: 1.23oz / 35g
Dimensions: 1.0 x 1.3 x .68in / 24.5 x 33 x 17.25mm
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews4.0 · 4 reviews
Do not buy this ESC if you plan on using it for 1/12 Mod. Despite Tekin's claim of 1S, 3.5T capability, this ESC will overheat and shut down if anything less than 10.5T is used. I contacted Tekin directly and they stated that this ESC was "Fringe" for Mod usage due to the plastic case it uses. They also stated that their Factory Drivers still use the RSX with a voltage booster. I installed a fan as they instructed but this did not solve the problem. I will be returning this product and tying something else. This is very sad because I really like the Tekin firmware and Hotwire system. I have been a loyal Tekin user for many years and this is the first product from them that has been a complete disappointment. As mentioned, the RS Pro 1S works just fine, as long as you use it for 10T and above.
I already have tektt1161 and they work very well,running 6.5/10.5/13.5 turns. The brakes are very good with great adjustments.
I'm using it with 6.5t/13.5t 1s without fans . Very Smooth and powerful. Breaking is the best on the market
Best esc for 1s racing have 4 of them and never had any problems
Reviewers are divided. Two of four ratings are 5/5 and praise smooth, powerful throttle response, strong braking and adjustability, with one reporting reliable use on 6.5T, 10.5T and 13.5T motors, some without fans. The 1/5 review, from a verified owner, reports overheating and shutdown on motors below 10.5T in 1/12 Mod use, says the manufacturer described the plastic case as unsuitable for Mod, and says a fan did not resolve the issue. That reviewer plans to return the unit. The reviews do not clearly show whether the overheating problem applies to all units or only Mod setups. The reviews also do not clearly establish whether the 1/12 Mod issue applies to racing use.
- + Smooth and powerful throttle
- + Strong braking and adjustment options
- + Reliable with 6.5T to 13.5T motors in reported use
- − Overheats and shuts down below 10.5T in Mod use
- − Plastic case reported as unsuitable for Mod
- − Fan did not resolve reported overheating