Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set (4)
About this part
This is an optional Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set. These aluminum 12mm hex adapters are intended for use with the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable.
Features:
- Hard anodized CNC machined aluminum construction
- Set screw to avoid losing drive pins
- Ultimate durability
- Lightweight design
- Compatible with our M6 Driveshafts for the Slash 2WD
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews4.8 · 6 reviews
This part is a must , if you have any model of M6 Driveshaft from Tekno. They seem to have listen to their customers, because the new upgraded part that I have received now comes standard with drive pins and those precious 6x10x0.2mm shims to remove play between your bearing and the HEX adapter.. I Think Amain should upgrade their picture for this part.
Tough as nails, fit the hub and the wheels like a glove. Basically it is typical Tekno quality!
These are needed as soon as you buy the Tekno M6 Driveshaft's because the stock plastic one's stripped in my rim and i had to buy a whole new tire
I grabbed these as a short term upgrade while I waited on a set of the 6.5mm Exotek hubs, but these are great. I also installed these right away when I built my Tekno SCT410.3 a year and half ago, and have had zero issues or problems with them. Theyve never come off, ive never stripped one and ive never had a wheel strip out or not fit properly. Great upgrade that I would tell every SCT410.3 owner to get right from the beginning..
Bought these for my Tekno SCT410 and they fit great. They were out of stock of the actual ones for the SCT410, so I tried these out. Couldn't be happier, cool color and the clamping is a nice feature. For racing you need the best, and these definitely are.
Reviewers consistently rate these aluminum M6 driveshaft hex adapters highly, with most describing a secure fit on the hub and wheels and no stripping or loosening after extended use. Several note that the stock plastic adapters stripped or pulled off the wheel, making this an upgrade. One reviewer reports the newer version includes drive pins and shims to reduce play between the bearing and hex adapter. One reviewer found a learning curve in tightening, noting that stripping is possible if over-tightened, and said they fit well after many assemblies. Reviews refer to the Tekno SCT410 and SCT410.3 models.
- + Secure fit on hub and wheel
- + Resists stripping compared with stock plastic
- + Clamping feature appreciated
- + Includes drive pins and shims in newer version
- − Can strip if overtightened
- − Stock-style tightening learning curve
- − Newer version differs from product photos