RCFeed Logo
Builds FeedParts FeedRC MarketplaceDiscussAbout Us
Parts/Drivetrain/Drivetrain hardware (hex hubs, pins)/Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)
Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)
Tekno RC

Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)

Part # TKR5149A5.0(3)
Drivetrain hardware (hex hubs, pins)Landcraft
Fits
Tekno RC EB48Tekno RC NB48Tekno RC NT48Tekno RC ET48Tekno RC SCT410Tekno RC MT410
Where to buy
$17.99
AMain Hobbies
Seen Oct 12, 2026
$17.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

This is a pack of six optional Tekno RC Aluminum Differential Cross Pins intended for use with the TKR5150. These pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR5150 to be compatible in the EB48. These new Pins are bigger in diameter, making the ends of the Pins flat so there is more contact area in the differential case. This helps eliminate wear on the case and produces a smoother, longer lasting differential.

Reviews5.0 · 3 reviews

GomdolVerified owneron Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)

Much better than stock SCT410.3 diff cross pin. It can really take some beating of high powered lipos such as 4S and 6S. If you plan to run your SCT410.3 or EB48SL on 4S, these are must!

1 found this helpful
Jordan AndersonVerified owneron Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)

Good part! Used on SCT410.3, never had any issues. Can't compare to the stock plastic ones as I never ran them.

1 found this helpful
Pete DeVriesVerified owneron Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150)

These are much lighter, fit perfect, and are a cost effective upgrade. Everyone should grab a set when they get a Tekno kit.

What reviewers say

Three verified owners rated this aluminum differential cross pin 5 out of 5. Reviewers say it is a clear step up from the stock plastic cross pin on the SCT410.3, is lighter, fits well, and holds up under high-powered 4S and 6S LiPo setups. One reviewer reported no issues after use on an SCT410.3, though that reviewer had not run the stock part, so no direct comparison is offered. Reviewers did not report any problems or disagreements. The sample is small, all three reviews are for the same variant, and the reviews mention only the SCT410.3 and EB48SL platforms.

  • + Stronger than stock plastic cross pin
  • + Lighter weight
  • + Good fit
  • + Holds up on 4S and 6S power
Summary generated from the reviews above.

Builds using this part

No builds use this part yet — add it to yours from the build editor.