Parts/Batteries & charging/LiPo batteries/Trinity 2S 130C Shorty LiPo Battery & "X-Factor" Modified Brushless Motor Mod Racer Bundle (7.6V/5200mAh) (7.5T) w/30mm Fan
Trinity 2S 130C Shorty LiPo Battery & "X-Factor" Modified Brushless Motor Mod Racer Bundle (7.6V/5200mAh) (7.5T) w/30mm Fan
Trinity

Trinity 2S 130C Shorty LiPo Battery & "X-Factor" Modified Brushless Motor Mod Racer Bundle (7.6V/5200mAh) (7.5T) w/30mm Fan

Part # TRI-1181
Where to buy
$199.99
AMain Hobbies
Seen Oct 12, 2026
$199.99Buy
Prices are as last seen at the store; stock is not tracked.

About this part

Budget-Friendly Savings Combo with High-Performance Features

The Trinity 2S 130C Shorty LiPo Battery and "X-Factor" Modified Brushless Motor Mod Racer Bundle is an all-in-one performance package built for serious RC racers. Designed for 1/10-scale competitive applications, this bundle combines Trinity's most advanced components to deliver professional-grade power, efficiency, and control.

About the Mod Racer Bundle


Compact Power & Efficiency

Engineered with cutting-edge cell technology, the Trinity 2S 130C Shorty LiPo Battery offers unmatched performance with an updated formulation that reduces internal resistance, providing smoother, more efficient power delivery and longer cycle life. The ultra-compact, low-profile design creates the lightest possible battery footprint, lowering the vehicle's center of gravity for sharper handling and improved chassis balance. Equipped with five-millimeter high-amp bullet connectors, the battery ensures secure, high-current connections with minimal loss, making it essential for maximizing acceleration and top speed.

Innovative Motor & Cooling Efficiency

The Revtech "X Factor" Modified Brushless Motor continues Trinity's legacy of innovation, offering a design that's 10% lighter than previous generations. Its updated sensor board and adjustable 0-60° timing range allow precise tuning for different track conditions, while the revolutionary timing ring and locking end plate systems enhance reliability and reduce weight. The X-Flow cooling system draws air directly through the motor can, keeping temperatures low and performance consistent throughout long runs. Paired with a durable aluminum-case cooling fan for additional heat management, the Mod Racer Bundle ensures optimal motor efficiency, sustained power, and cooler operating temps under extreme conditions.

Features:

  • Pro-level performance bundle for 1/10-scale racing
  • Ultra-low center of gravity battery with a compact design
  • Advanced LiPo cells provide lower internal resistance and longer lifespan
  • Five-millimeter high-amp bullet connectors deliver secure and efficient power transfer
  • X-Factor motor is 10% lighter with updated sensor board and timing adjustability
  • X-Flow cooling design reduces motor temperatures during extended runs
  • Aluminum-case cooling fan ensures consistent heat management and reliability

IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

  • DO NOT leave a battery in your model when charging
  • DO NOT leave lithium batteries unattended when charging
  • ALWAYS balance charge lithium battery
  • ALWAYS use a LiPo Safe charging bag/box
  • YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
  • YOU MUST not over-discharge lithium battery packs
  • READ & UNDERSTAND the instructions carefully before operating this battery

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

Includes:

  • (1) 2S 130C Shorty LiPo Battery (7.6V/5200mAh)
  • (1) Revtech "X Factor" Modified Brushless Motor (7.5T)
  • (1) 30x30mm Aluminum Cooling Fan
  • (1) Sensor Cable
  • (2) 5mm Bullet Connectors

Specifications:

Battery
Nominal Voltage 7.6V (2S)
Capacity 5200mAh
Maximum Charge Rate 1C
Discharge Rates -
Continuous: 130C
Peak: -
Cell Configuration -
Watt Hours 39.52Wh
Connectors -
Battery: 5mm
Balance: 2mm Bullet
Dimensions (LxWxH) 3.77x1.87x0.81in (95.8x47x20.6mm)
Weight 6.3oz (180g)
Motor
Motor Type Brushless - Sensored
Turns 7.5T
Input Voltage 1-2S LiPo
Connector Solder
Length 4.3in (109mm)
Diameter 3.12in (79mm)
Shaft Diameter -
Weight -

Reviews

No reviews yet.

Builds using this part

No builds use this part yet — add it to yours from the build editor.