Vanquish Products 20mm Aluminum Clamping Servo Horn (25T-ProTek/Savox/Futaba)
About this part
Features:
- 25 tooth servo spline is compatible with ProTek R/C, Savox, Orion, Futaba and more
- 20mm from center of servo output to center of outward most hole
- Milled from high quality aluminum
- Unique clamping style keeps splines more engaged on the servo output
NOTE: Check your servo manufacturers specs to find what servo spline you need.
Reviews4.3 · 8 reviews
Too thick for SCX10 II. It either hits the panhard bar mount or the frame itself depending on if shims are used.
Clamping screws were missing from the packet, so that’s another expensive, thanks Vanquish
Bought this to replace the stock servo horn on my Axial 10.3 Gladiator JT. Fits great and clears pan hard bar.
I've got a few of these servo horns made by Vanquish. Overall I like the design of these over any of the other brands I have used over the years. They are sculpted where they are plenty strong, but still allow for maximum clearance in tight places. The double set screws help to keep them clamped on. I haven't had an issue with one yet! Highly recommended!
Its a high quality servo horn, love that it clamps as well as standard mount.
Reviewers mostly rate this aluminum clamping servo horn highly, citing strength, a thin profile, and a secure clamp. Several owners of Axial and Vanquish VS4 builds report good fit and clearance. One reviewer found it too thick for an SCX10 II, where it contacted the panhard bar mount or frame depending on shim use. Another reported that clamping screws were missing from the package. Overall ratings are mostly 5/5, with the fit and missing-hardware complaints the main negatives.
- + Strong yet thin profile
- + Secure clamping with double set screws
- + Good fit and clearance on Axial and VS4 builds
- + Strong build quality
- − Too thick for SCX10 II, clashes with panhard bar or frame
- − Clamping screws missing from package
- − Only available in one colour