XRAY T4 Brass Front/Rear Lower 1-Piece Suspension Holder

The XRAY T4 Brass Front/Rear Lower 1-Piece Suspension Holder for the rear of the front bulkhead adds 12 grams of additional weight, helping to bring the car up to the minimum weight limit. Plus, it is recommended that you use this in place of chassis-mounted weights that can negatively influence chassis flex. Using the brass holders in the Front reduces traction roll and is recommended for high-traction conditions.

The brass holders are 3x heavier than aluminum holders, they place the extra weight equally on left and right sides, and they keep the CG as low as possible while not introducing negative flex to the chassis. Moreover, the brass holders also influence the handling characteristics, and may be used for further fine-tuning the car’s set-up.