Yeah Racing RMX 2.0 and 2.5 Titanium Tie Rod Set
About this part
Reviews4.0 · 6 reviews
Ball joints are way too tight but easily solved if you just use the stock ball joints otherwise be prepared to spend some time sanding down and polishing your ball joints.
Kit came with everything I needed to have adjustable links on my RMX 2.0 kit. I would have given it 5 stars but the included ball studs were an extremely tight fit in the end links (to the point that the suspension and servo was bound up). I ended up squeezing the plastic end links with needle nose pliers (while installed on the ball) to loosen the fit ever so slightly.
NO BINDING WHAT SO EVER. I suggest with any turnbuckle to use rheemer on ends and use some dif lube or tge like to make turnbuckle easy to turn. Recommended spacing between ends no always accurate. Nice lil upgrade
Exactly as described and fast shipping as always!Great product!
I don’t recommend getting these unless you know what you’re doing. I got these to try and make the wheels straight and aligned. That way they can be nice and flush with the cars body and look nice. Unfortunately that changed the handling of my rmx 2.5 completely. There’s no point in getting these to just adjust them how the factory’s are. I put the factory parts back on and I was able to swing the car again. Also, after they were in and I was adjusting them they kept popping off the ball joints so that was annoying but once they were in I used the rc for about 30 min trying to learn the controls again and had no issues with the parts them self’s other than the car was undrivable.
Reviewers generally rate the Yeah Racing RMX 2.0 and 2.5 titanium tie rod set well, with most reporting it fits and works as described. Fit was a recurring issue: several reported the ball joints were too tight and needed sanding, polishing, or squeezing of the plastic end links, while one found the included ball studs bound the suspension and servo until loosened. Others noted a missing 15mm link end, and one reported that the adjusted geometry made the RMX 2.5 undrivable, prompting a return to factory parts. Some reviewers suggested lubricating the turnbuckle and noted spacing between ends was not always accurate. Shipping was described as fast. Overall, positive reviews focus on the upgrade and no-binding fit, while negative ones center on tight fit and handling changes.
- + Fits and works as described
- + No binding after adjustment
- + Fast shipping
- − Ball joints too tight out of the box
- − Missing 15mm link end reported
- − Adjustment changed handling and made car undrivable for one owner