Parts/Suspension & steering/Shock parts & springs/Yokomo YD-2 LF Big Bore Tapered Shock Piston (1.1x6)

Yokomo
Yokomo YD-2 LF Big Bore Tapered Shock Piston (1.1x6)
Part # YOKY2-S116TA
Fits
Where to buy
$9.49
Prices are as last seen at the store; stock is not tracked.
About this part
The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift members. One side of the shock piston has been tapered. The damping feeling differs depending on the mounting direction. To soften the feeling on the extension place the tapered side to the bottom of the shock. To soften the feeling on the contraction place the tapered side towards the shock cap.
The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This has the effect of suppressing disturbance in the shock by increasing the dampening force. In normal drift setup the shocks are often set very soft. When using a soft shock oil the oil film tends to run out between the O-ring and the shock shaft. To combat this Yokomo equipped this with a 6-hole design exclusively for drift and recommends using around 300cst oil.
Includes:
The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This has the effect of suppressing disturbance in the shock by increasing the dampening force. In normal drift setup the shocks are often set very soft. When using a soft shock oil the oil film tends to run out between the O-ring and the shock shaft. To combat this Yokomo equipped this with a 6-hole design exclusively for drift and recommends using around 300cst oil.
Includes:
- (2) 1.1mm 6-Hole shock pistons
CA Residents Prop 65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Details...Reviews
No reviews yet.
Builds using this part
No builds use this part yet — add it to yours from the build editor.