Parma PSE Fasmask Liquid Paint Mask (8oz)
About this part
Liquid Mask Overview:
Parma PSETQ Fasmask Liquid Paint Mask. This is a bottle of Parma PSE Faskolor Liquid Mask. This easy-to-use liquid mask allows painters to create custom designs more easily, without the use of masking tape. It works great for painting Lexan RC bodies, but can also be used to paint helicopter canopies, models, helmets or anything else you want to unleash your artistic creativity on! It dries clear so you can draw your design on the outside of the body and can still see your design allowing you to cut out the Fasmask on the inside. The average RC body requires 2-3 ounces.
Use a 1/2" wide paint brush or airbrush with a large tip to apply a thick even coat. Allow it to dry or use a blow dryer to speed up dry time and repeat for a nice "skin", thick enough that it will allow you to cut through with a hobby knife and peel away the sections you want to paint. You can also use a smaller brush to mask off small, specific areas such as windows, bumpers and graphics.
Tech NOTE:
- Please shake well before use as liquid consistency may vary as storing temperature changes
- When using a hobby knife, cut lightly so you do not cut deep enough to cut the body!
Includes:
- (1) Bottle of Fasmask Liquid Paint Mask
Reviews4.3 · 7 reviewsacross all options
It's obvious that the prior reviewer of this product has no idea how to use it. All top painters of lexan bodies use liquid mask. I've been using for many years and have never had an issue. 5-6 good thick coats and your good to go. to speed up dry time in between coats you can use a hair dryer, or stick in front of a fan.
This is a solid and useful product as long as you follow the directions. It's more versatile than vinyl masks but the downside is that it takes significantly longer to prep and paint a body. For my money, I still prefer working with flat vinyl, but I'll keep this stuff handy for those times when flat vinyl just won't do the trick and I need something more flexible. This is a good tool to have on hand for anyone who frequently paints bodies.
junk don't waste your money, use tape..... unless you have 2 weeks to paint a body....
This stuff is awesome, get acouple of good coats on the inside of the lexan body. Let it dry over night and you are good to start cutting out your chosen design. You can even let it sit for a week before you start cutting out the design and it still peals up just as nicely.
This was my first time using liquid mask as I'm newer to painting rc bodies. It was really simple to use, put 2-3 good coats on the inside of the rc body, let it dry over night and cut out my designs or what I wanted to paint first. When cutting the mask be sure not to press to hard and cut the lexan. No sticky residue left behind from tape. Would absolutely recommend
Reviewers mostly rate this liquid paint mask highly, with most praising its ease of use on the inside of lexan bodies, typically after 2 to 6 thin or thick coats and an overnight dry. Several note that masks cut cleanly and peel without residue, and one says the mask still peels well after sitting a week. Reviewers disagree on overall value: one rates it 1/5, calling it junk and saying tape is faster, while another says it takes significantly longer to prep than flat vinyl but is useful for complex or flexible designs. Some reviewers mention that over-pressing the knife can cut through the lexan. Reviews cover the 4oz, 8oz and 16oz sizes, and the verified-owner reviews are generally positive. Remarks about other reviewers are not relevant to the product.
- + Clean peel with no sticky residue
- + Works well for complex designs
- + Mask still peels well after a week
- + Easy to apply with a few coats
- − Takes longer than vinyl or tape
- − Requires careful knife pressure to avoid cutting the lexan
- − One reviewer found it unusable