Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (35 Shore) (Carbon Black) w/12mm Hex

Name: Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (35 Shore) (Carbon Black) w/12mm Hex
Brand: Contact
SKU: CONJ13574
Price: 11.25 USD
Rating: 4.33 (6 reviews)

Part # CONJ135744.3(6)

Tires (on-road)Landcraft

Compound

35 Shore 37 Shore 40 Shore 42 Shore

Where to buy

$11.25

AMain Hobbies

Seen Oct 12, 2026

$11.25Buy

Prices are as last seen at the store; stock is not tracked.

About this part

This is a set of two Contact RC 30mm 1/10 Scale Nitro Sedan Foam Rear Tires mounted on mounted on Black Carbon Wheels. Made with an innovative foam compound, Contact RC tires are made with only the best materials, and rated using a fully automated durometer hardness system that provides consistent shore rating/density from tire to tire. The fully automated gluing, and truing processes mean that every single tire produced meets the high standards required by top level racers.

Available in shore ratings from #35 to #45. The Carbon Wheels are good for serious racers and suitable for high grip and fast tracks. The Carbon Wheel guarantees stiffness and the best car response even in high temperatures.

Reviews4.3 · 6 reviewsacross all options

Anonymouson Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2)

Nice looking tires and rims,I got the 35 shore,nice and sticky foam,made in United kingdom...great price too

2 found this helpful

Dave MooreVerified owneron Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (40 Shore)

THIS TIRE DOES NOT FIT A 4 TEC 2.0 VXL. THE OFFSET IS TO MUCH & WILL RUB, TRIED A LARGER HEX HUB AND IT DID NOT RUB, BUT U COULD NOT PUT THE NUT ON TO HOLD TIRE ON.... WISH I COULD FIND FOAM TIRES THAT ARE DIRECT REPLACEMENT FOR OEM TIRES... THE TIRE LOOKS GREAT, BUT DID NOT WORK FOR MY APPLICATION....

2 found this helpful

Paul MafnasVerified owneron Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (35 Shore)

Can't say I'd recommend them for dusty asphalt, but on a grippy surface, then not too bad. Running 35sh rears and 40sh fronts, and my 4tec 2.0 pushes through the turns. Need to lower the front shore a little bit or go 35sh all around. Speaking of using them on a 4tec, they will fit just fine. Use the regular rear hubs and add a 1mm or 2mm washer. Works like a charm and the rod ends don't get messed up; the previous owner of this 4tec didn't hear about washers, so his tires had a notch cut into the foams and rod ends. Ordered another set to try out some tuning options.

1 found this helpful

Terry PelzerVerified owneron Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (35 Shore)

They are great tires. Awesome traction on my 2wd slash derby car. I buy a lot these tires and are a favorite in my derby series

Nick CaouetteVerified owneron Contact 30mm 1/10 Nitro Sedan Foam Rear Tires (2) (42 Shore)

Not bad Thay look good on the car and the price is fair if they can get more in stock I'd buy them once and awhile my RC car eats them up might try 35 shore or 40shore to 42shore on my RC car are fun though thay seem to have good grip though.

What reviewers say

Six reviews, mostly positive, praising the grip, sticky foam, appearance and price of these 30mm Contact sedan rear tires across 35, 40 and 42 shore variants. Reviewers note the tires work well on grippy surfaces but are less suited to dusty asphalt. One verified owner on a 4Tec 2.0 VXL reports fitment problems: the offset caused rubbing, and the nut would not seat on a larger hex hub. Another 4Tec owner says the tires fit with regular rear hubs plus a 1 or 2 mm washer. Stock availability is mentioned as an issue by one reviewer.

+ Strong grip and sticky foam
+ Good looks
+ Fair price
+ Works with washer spacer on 4Tec 2.0

− Poor on dusty asphalt
− Offset causes rubbing on some 4Tec VXL
− Limited stock

Summary generated from the reviews above.

Builds using this part

No builds use this part yet — add it to yours from the build editor.